Zanussi ZSF 4112 manual Rinse aid, Filling with rinse aid, Adjusting the dose

Page 7

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

●If you are using dishwasher detergent that already contains rinse aid, it is necessary to deactivate the dosage of rinse aid, in order to avoid a double dosage.

Deactivation/activation of the dosage of rinse aid

(The dishwasher must be switched off)

Factory setting: dosage of rinse aid activated

When the dosage of rinse aid has been deactivated, the rinse aid indicator light on the control panel is automatically deactivated.

BR07

BR14

1. Press the On/Off push button. The On/Off indicator light

illuminates (setting mode).

If a programme push button indicator light is on, this means

that a washing programme has been set. The programme

must be cancelled: press simultaneously the function push

buttons 2 and 3 for about 2 seconds.

All the indicator lights will turn off (except for the On/Off

indicator light and eventually salt and rinse aid indicator

lights) indicating that the set programme has been

cancelled and the machine is now in setting mode.

2. Press simultaneously function push buttons 2 and 3, until

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position

6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky

 

whitish streaks on the dishes

 

or a bluish film on glassware

 

or knife blades.

BR09

Top up the rinse aid when the indicator light on the control panel illuminates.

 

the indicator lights of the function push buttons 1, 2 and 3

 

start flashing.

3.

Press the function push button 2, the indicator lights of

 

function push buttons 1 and 3 turn off while the indicator

 

light of the function push button 2 goes on flashing, at the

 

same time the indicator light End of cycle illuminates

 

indicating that the dosage of rinse aid is active.

4.

To deactivate the inflow of rinse aid, press the function push

 

button 2 again, the indicator light End of cycle turns off,

 

indicating that the dosage of rinse aid has been deactivated.

5.

To memorise the operation, switch off the dishwasher by

 

pressing the On/Off push button or wait about 60 seconds

 

after which the dishwasher will automatically return to

 

setting mode.

To activate the dosage of rinse aid follow the above instructions until the indicator light End of cycle illuminates.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Examples Prior to using for the first timeIndicator light Water softenerTo fill Filling with saltDeactivation/activation of the dosage of rinse aid Adjusting the doseRinse aid Filling with rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketTo move to the higher position proceed as follows Adjusting the height of the upper basketCutlery basket Upper basketFill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Press the On/Off push button Setting and starting the programmeTo interrupt or cancel a washing programme in progress Starting a washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The world’s No.1 choice

ZSF 4112 specifications

The Zanussi ZSF 4112 is an innovative built-in dishwasher designed to meet the needs of modern households while delivering outstanding performance and efficiency. This model blends functionality with style, making it an excellent addition to any kitchen setup.

One of the standout features of the Zanussi ZSF 4112 is its energy efficiency. With an A+ energy rating, this dishwasher is designed to consume less electricity, ultimately saving you money on your utility bills and reducing your environmental footprint. It also offers a low water consumption rate, which is advantageous for sustainability-conscious consumers.

The ZSF 4112 is equipped with multiple wash programs to accommodate various dishwashing needs. Whether you're dealing with heavily soiled pots and pans or delicate glassware, this dishwasher has a program to suit your requirements. The Quick Wash program is especially useful for those times when you’re in a hurry, delivering clean dishes in a fraction of the usual time without compromising on results.

One of the most convenient features of this appliance is its adjustable racks, which allow you to customize the interior space according to your needs. The upper rack can be easily raised or lowered to create room for larger items on the bottom shelf. Moreover, the dishwasher includes a cutlery basket that keeps your utensils organized and provides optimal cleaning performance.

The Zanussi ZSF 4112 also emphasizes quiet operation, making it ideal for open-plan living spaces. Its noise level is impressively low, allowing you to run the dishwasher even during the night without disturbing your household.

Technologically, this model comes with a variety of smart features. The Delay Start option lets you plan your wash cycles around your schedule, allowing the dishwasher to run at a time that is most convenient for you. This means you can take advantage of off-peak electricity rates or ensure that your dishes are cleaned just before dinner.

In terms of build and design, the Zanussi ZSF 4112 boasts a sleek and modern appearance that can seamlessly blend with other kitchen appliances. It features an intuitive control panel, making it easy to navigate through different settings.

In summary, the Zanussi ZSF 4112 is a comprehensive dishwasher that combines efficiency, versatility, and ease of use. With its various wash programs, adjustable racks, and energy-saving capabilities, it stands out as a reliable choice for any busy household looking for top performance in their dishwashing appliance.
Top Page Image Contents