Zanussi ZDT 311 user manual

Page 15

Load cutlery. For best re- sults we recommend you to use the cutlery grid pro- vided (if the size and di- mensions of the cutlery allow it)

The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls.

Load upper basket. Light items (plastic bowls etc.) must be loaded in the up- per basket and arranged so they do not move.

Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury!

For taller items, the cup racks can be folded up- wards.

Load the lower basket. Ar- range serving dishes and large lids around the edge of the basket.

If plates are to be loaded in the upper basket: load them starting from the rear positions; tilting them slightly forwards and avoiding the front positions near the door.

15

Image 15
Contents Dishwasher ZDT Contents Correct use Safety informationGeneral safety Child safetyInstallation Control panelFunctions buttons Indicator lights Audible signals Select and start a washing programmeDeactivation/activation of the audible sig- nals End of the washing programme Cancelling the delay startCancel a washing programme in progress Interrupt a washing programme in pro- gressUse Washing programmesAuto washing programme ProgrammeUse of salt First useSet the water softener Water hardness Mmol/lSetting the water softener manually see table Setting the water softener electronically see tableDishwasher is factory set at level Examples Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Page Upper basket Adjusting the height of the upper basketUse of detergent Maximum height of the dishesDetergent tablets Multi-Tab functionActivation/deactivation of the Multi-Tab function Activation/deactivation of the rinse aid dispenserCare and cleaning Cleaning the filtersUnloading the dishwasher Prolonged periods of non- operation Cleaning the spray armsExternal cleaning Internal cleaningPackaging material Frost precautionsEnvironmental concerns Moving the machineFault code and malfunction Possible cause and solutionSomething not working Wash results are not satisfactory Technical data Consumption valuesHints for test institutes Installation Full load 12 standard place settingsWater connection Water inlet hose with safety valve Electrical connection Drain hoseLevelling Fitting under a counterPage Page Page 156992690-00-05102007 Subject to change without notice