Zanussi ZDT 311 user manual Adjusting the dosage of rinse aid, Loading cutlery and dishes

Page 13

CAUTION!

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Top up the rinse aid indica- tor (B) becomes clear

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades.

Open the lid.

Set the dosage level. (The

Close the lid and press un-

 

dose is factory set in po-

til it locks.

 

sition 4).

 

Loading cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

Remove all left over food and debris.

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans, etc. with the opening downwards so

13

Image 13
Contents Dishwasher ZDT Contents General safety Safety informationChild safety Correct useControl panel InstallationFunctions buttons Indicator lights Select and start a washing programme Audible signalsDeactivation/activation of the audible sig- nals Cancel a washing programme in progress Cancelling the delay startInterrupt a washing programme in pro- gress End of the washing programmeAuto washing programme Washing programmesProgramme UseSet the water softener First useWater hardness Mmol/l Use of saltSetting the water softener electronically see table Setting the water softener manually see tableDishwasher is factory set at level Examples Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Page Use of detergent Adjusting the height of the upper basketMaximum height of the dishes Upper basketDetergent tablets Multi-Tab functionActivation/deactivation of the Multi-Tab function Activation/deactivation of the rinse aid dispenserCleaning the filters Care and cleaningUnloading the dishwasher External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironmental concerns Frost precautionsMoving the machine Packaging materialPossible cause and solution Fault code and malfunctionSomething not working Wash results are not satisfactory Consumption values Technical dataHints for test institutes Full load 12 standard place settings InstallationWater connection Water inlet hose with safety valve Electrical connection Drain hoseLevelling Fitting under a counterPage Page Page 156992690-00-05102007 Subject to change without notice