Zanussi ZDT 311 user manual Consumption values, Technical data, Hints for test institutes

Page 24

Consumption values

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var-

iations of the power supply and the amount of dishes.

Consumption values

Programme

 

Programme duration (in

Energy consumption (in

Water (litres)

 

 

minutes)

kWh)

 

Intensive 70°

 

80-90

1,6-1,8

22-24

AUTO 45° 70°

 

90-125

1,1-1,6

12-23

65°A30'

 

30

0,9

9

BIO 50° (Test pro-

 

160

1,05

14

gramme for Test Insti-

 

 

 

 

tutes)

 

 

 

 

Glass 45°

 

60-70

0,8-0,9

14-15

 

 

 

 

 

Technical data

Dimensions

Electrical connection Voltage - Overall power - Fuse

Water supply pressure

Capacity

Max. weight

Noise level

Width x Height x Depth (cm)

59,6 x 81,8-87,8 x 55,5

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door.

Minimum - Maximum

0,05 - 0,8

(MPa)

 

place settings

12

kg

37

dB(A)

47

 

 

Hints for test institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "Consumption values").

Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and

24

Image 24
Contents Dishwasher ZDT Contents Safety information General safetyChild safety Correct useInstallation Control panelFunctions buttons Indicator lights Audible signals Select and start a washing programmeDeactivation/activation of the audible sig- nals Cancelling the delay start Cancel a washing programme in progressInterrupt a washing programme in pro- gress End of the washing programmeWashing programmes Auto washing programmeProgramme UseFirst use Set the water softenerWater hardness Mmol/l Use of saltSetting the water softener manually see table Setting the water softener electronically see tableDishwasher is factory set at level Filling with dishwasher salt ExamplesFilling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishesAre of limited suitability Page Adjusting the height of the upper basket Use of detergentMaximum height of the dishes Upper basketMulti-Tab function Detergent tabletsActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multi-Tab functionCare and cleaning Cleaning the filtersUnloading the dishwasher Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environmental concernsMoving the machine Packaging materialFault code and malfunction Possible cause and solutionSomething not working Wash results are not satisfactory Technical data Consumption valuesHints for test institutes Installation Full load 12 standard place settingsWater connection Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter LevellingPage Page Page 156992690-00-05102007 Subject to change without notice