Zanussi ZDT 311 user manual Cleaning the spray arms, External cleaning, Internal cleaning

Page 20

Clean filters A, B and C thoroughly under running water.

Put the flat filter A back in

Replace the filters and

the base of the washing

lock by turning the handle

compartment and ensure

clockwise to the stop.

that it fits perfectly under

 

the two guidesD.

 

Turn the handle about 1/4

Remove filter A from the

turn anticlockwise and re-

base of the washing com-

move filters B and C.

partment.

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or sol- vent (acetone, trichloroethylene etc....).

20

Internal cleaning

Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.

Prolonged periods of non- operation

If you are not using the machine for any pro- longed period of time you are advised to:

1.Unplug the appliance and then turn off the water.

Image 20
Contents Dishwasher ZDT Contents Safety information General safetyChild safety Correct useFunctions buttons InstallationControl panel Indicator lights Deactivation/activation of the audible sig- nals Audible signalsSelect and start a washing programme Cancelling the delay start Cancel a washing programme in progressInterrupt a washing programme in pro- gress End of the washing programmeWashing programmes Auto washing programmeProgramme UseFirst use Set the water softenerWater hardness Mmol/l Use of saltDishwasher is factory set at level Setting the water softener manually see tableSetting the water softener electronically see table Filling with dishwasher salt ExamplesFilling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishesAre of limited suitability Page Adjusting the height of the upper basket Use of detergentMaximum height of the dishes Upper basketMulti-Tab function Detergent tabletsActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multi-Tab functionUnloading the dishwasher Care and cleaningCleaning the filters Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environmental concernsMoving the machine Packaging materialSomething not working Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Hints for test institutes Technical dataConsumption values Water connection InstallationFull load 12 standard place settings Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter LevellingPage Page Page 156992690-00-05102007 Subject to change without notice