Zanussi ZDT 311 Washing programmes, Auto washing programme, Programme, Use, Cycle description

Page 8

IMPORTANT!

When the washing programme has finished, it is recommended that the dishwasher is un-

plugged and the water tap turned off.

Washing programmes

Programme

Intensive 70°

AUTO A 45°-70°

65°A30'

Bio 50°

Glass 45°

Use

Heavy soil.

Crockery, cutlery, pots and pans

Normal / Light soil.

Crockery and cutlery

Light soil.

Crockery and cutlery

Normal soil.

Crockery cutlery

Normal soil

Delicate crockery and glassware

Cycle description

Prewash Main wash

2 intermediate rinses Final rinse

Dry

Prewash Main wash

1 or 2 intermediate rinses Final rinse

Dry

Main wash Final rinse

Prewash Main wash

1 intermediate rinse Final rinse

Dry

Main wash

1 intermediate rinse Final rinse

Dry

"Auto" washing programme

During the "Auto" washing programme the amount of soil on the dishes is determined by how cloudy the water is.

If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme are shorter and the water consumption level is lower.

If the appliance is fully loaded and the dishes heavily soiled, the "prewash", "main wash", and "rinse" phases of the programme are longer and the water consumption level is higher. For this reason the programme duration, water and energy consumption levels can vary within the stated range for "Auto" programme (see "Washing programmes chart").

During the "Auto" programme the temperature of the main wash water is also automatically

8

Image 8
Contents Dishwasher ZDT Contents Safety information General safetyChild safety Correct useFunctions buttons InstallationControl panel Indicator lights Deactivation/activation of the audible sig- nals Audible signalsSelect and start a washing programme Cancelling the delay start Cancel a washing programme in progressInterrupt a washing programme in pro- gress End of the washing programmeWashing programmes Auto washing programmeProgramme UseFirst use Set the water softenerWater hardness Mmol/l Use of saltDishwasher is factory set at level Setting the water softener manually see tableSetting the water softener electronically see table Filling with dishwasher salt ExamplesFilling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishesAre of limited suitability Page Adjusting the height of the upper basket Use of detergentMaximum height of the dishes Upper basketMulti-Tab function Detergent tabletsActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multi-Tab functionUnloading the dishwasher Care and cleaningCleaning the filters Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environmental concernsMoving the machine Packaging materialSomething not working Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Hints for test institutes Technical dataConsumption values Water connection InstallationFull load 12 standard place settings Water inlet hose with safety valve Drain hose Electrical connectionFitting under a counter LevellingPage Page Page 156992690-00-05102007 Subject to change without notice