OperatingInstructions
112
5.1 Network Camera Reset Procedure—DefaultSettings
If the user forgets settingsor passwords, Network Camera can be easily reset to
the default settings.The CLEAR SETTING button initializes all the parameters
except Date andTime setting.
With power on,presstheCLEARSETTING button for about one second.
Indicator changes such as Orange blinking twice –> Turning off about 15
seconds.Initializing takes about one minutes. Pan/Tiltmotors will set to the home
position.
Notes
• Wirelessnetwork parameters, IP address and Subnet Mask will be also
set to factory default.Wireless network parameters must be
reconfigured.
• WhenpressingtheCLEARSETTING button, all buffered images are
cleared.
• Rubber Cap must beinstalled in the CLEAR SETTING button hole. It
protects the Network Camera'sinternal components from moisture
damage.
7)
6)
5)
CLEAR SETTING button
(Press the button with a
pointed object.)
Put the Rubber
Cap back tightly
to prevent the
water from
getting in.
1)
2) 3) 4)
Carefully insert the Rubber Cap into the
hole, gently pressing it into place using
the end of the long tool.