Operating Instructions
[For assistance,please call: 1-800-272-7033] 81
Over write setting:
Selects [Over Write...]to overwrite the transferred image or [Add
time...] to saveeach transferred image.
Data transfer method:
Use [PassiveMode] normally. If FTP does not work properly,ask your
ISP or network administratorabout the transferring mode of FTP
server. [PassiveMode] or [Active Mode] is available.
b. Mail: Sets the SMTPand POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From (Reply)*3: Enterthe e-mail address of [Reply-to]. [To] can be the
same address as From (Reply).
To *3: Enter the e-mail a ddress of receiver.
Subject & Text *4: Sets the subject and textof the e-mail.
Timein24hmodeisattachedonthesubject.
Notes
• Set POP3 server address or Host Name, LoginID and
Passwordif you need POP authentication to send the e-mail.
ask your ISP or administrator.
• Network Camera will only operatecorrectly with SMTP (Simple
Mail Transfer Protocol) server.It is not available with the Internet
accessedmail servers like "Hotmail" or others accessed via the web
browser.
*1Refer to IP addressing on page108.
*2Refer to unavailablecharacter set 1 on page 108.
*3Refer to unavailablecharacter set 2 on page 108.
*4Only ["] is unavailablein the ASCII character table on page 108 and
refer to displayablecharacter set on page 109.
2. Select/Enter the each parameter.Click [Save]when finished.
• Click[Cancel]to quit the cu rrent settings. The window retur ns to Setup
Page without savingthe parameters.
• Click [Clear Buffered images]to clear thebuffered image.
[Clear Buffered images]does not savethe parameters.
Note
Refertopage50fortheBufferedImage.