Panasonic KX-HCM270 operating instructions Using Operation Bar

Operating Instructions

3.3.1Using Operation Bar

Operation bar controls the general use of Network Camera. The following sections describe the general way of using it.

(1)		End Display: When Pan/Tilt operation has reached the
(1)		end of corner, Left End, Right End, Up End or Down
		End appears.
		Locked Display: Pan/Tilt/Preset, Brightness Control and
(2)		Preset program can be locked. Locked appears when the
		operation bar is clicked.
		Preset Display: Preset name appears when clicking
		Preset Button.
(3)	(2)	Pan/Tilt Scan, Pan/Tilt and Home Position:
		Refer to page 47.
(3)		Preset Buttons: Refer to page 48.

(4)

(5)

(6)

(7)

(8)

(9)

(4)Brightness: Brightness control has nine steps including [STD] (Standard). Clicking [-]and [+] buttons changes the brightness of image. Brightness can be locked on Camera Setup window on page 82.

(5)Resolution: [640 x 480], [320 x 240] (default) or [160 x 120]

(6)Image Quality: [Favor Clarity] optimizes the image for good clarity. [Standard] keeps the standard quality. [Favor Motion] optimizes the image for motion display.

(7)Image Size: The default image size is x 1. [x 1.5] expands only the size. The resolution does not change.

(8)Buffered Image: [Start Capture] starts buffering the image. [Viewer] links to the Buffered Image screen on page 50. Each button changes to [Primary] and [Secondary] button when using Image Transfer feature.

(9)Link Buttons: Each buttons link to the Multi-Camera screen, Top Page and Help Page.

46