Panasonic KX-HCM270 About Network Camera Setup Problem Cause and Remedy, 124

Operating Instructions

		About Network Camera Setup
Problem			Cause and Remedy
Wireless	• Signal strength is weak. Change the location of Network
communication	Camera or remove the obstacles around Network Camera.
does not work.	• SSID and Encryption setting of Network Camera are different
	from those of the wireless router or the wireless LAN card of
	PC. SSID and Encryption setting must be identical for Network
	Camera and wireless router.
	• Remove the Ethernet cable and reconnect the AC adaptor for
	Network Camera to recognize the Wireless Communication
	mode.
Wired	Reconnect AC adaptor for Network Camera to recognize the
communication	change from wireless to wired communication or vice versa.
does not work.
Update	When Update Firmware is interrupted by power off, or for network
Firmware has	troubles and other problems, follow the procedure below.
not finished.
			Turn on Network Camera and the PC.
		Enter the IP address on the web browser to access
		Network Camera.
							Update
							Firmware
			Top Page or Update				window
			Firmware window?
					Top Page
			Access Setup Page or Status window.
			Check the Firmware Version Number.
								No
			Is the Version wished number?
					Yes	Perform Update
						Firmware*1.
				Update Firmware is completed.
	*1 Refer to page 91 for the Update Firmware.

124