Panasonic KX-HCM270 operating instructions Wireless Setup, To access Network window

Operating Instructions

2.7Wireless Setup

To access Network window

1.Enter "http://IP Address (or URL) :Port No./config.html" on the web browser and press [Enter]. Setup Page appears. Refer to page 54 for the detail of Setup Page.

• When port number is 80 (default), you do not need to enter port number.

2.Click [Network] on Setup Page.

To set up the wireless network parameters

Set SSID (ESSID) and Encryption (WEP) setting of the wireless router to Network Camera in Infrastructure mode and AdHoc mode. AdHoc mode requires you to set channel additionally. Ask the administrator for SSID and Encryption settings. Follow the steps on the next pages.

a)

1.

2.

3.

4.

a)[Status] displays the detail of the wireless network conditions on Wireless window. Those conditions are useful to decide where to install Network Camera. Wireless window refreshes every 10 seconds.

MAC address of wireless router is displayed in Infrastructure mode. BSSID is automatically generated from

SSID in AdHoc mode. Connected channel

Speed of the data communication

*1 Status of the data communication between Network Camera and wireless router

*1 Signal Strength condition between Network Camera and wireless router.

Wireless Software version no. It is different from Setup Page version no.

*1 Refer to the next page for the connection and signal strength status.

32