Zanussi ZDT41 manual Technical data, Environment concerns, Cleaning results are not satisfactory

Page 13

The cleaning results are not satisfactory

The dishes are not clean

• The selected washing programme is not applicable for the type of load and

 

 

soil.

 

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

 

• Spray arms do not turn freely because of incorrect arrangement of the load.

 

The filters are dirty or not correctly installed.

 

The quantity of detergent is too little or missing.

Limescales particles on the dishes

• The salt container is empty.

 

• The water softener is adjusted on a wrong level.

 

• The salt container cap is not closed correctly.

The dishes are wet and dull

• No rinse aid has been used.

 

• The rinse aid dispenser is empty.

There are streaks, milky spots or

• Decrease the rinse aid dosage.

a bluish coating on glasses and

 

 

dishes

 

 

Dry water drop signs on glasses

• Increase rinse aid dosage.

and dishes

• The detergent can be the cause.

Technical data

Dimensions

Electrical connection - Voltage - Overall power - Fuse

Water supply pressure

Capacity

Width cm

59,6

Height cm

81,8-87,8

Depth cm

55,5

 

 

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.

Minimum

0,5 bar (0,05

MPa)

Maximum

8 bar (0,8

MPa)

Place settings

 

12

 

 

 

Environment concerns

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities.

13

Image 13
Contents ZDT41 Safety information ContentsContact your local Service Force Centre Programme selection/cancel buttonIndicator light Control panelProgramme indicator lights a and B Setting modeAudible signals Washing programmesUse of the appliance Setting the water softenerConsumption values Electronic adjustment Manual adjustmentWater hardness setting Manually Use of dishwasher saltImportant! Fill the salt container from time to time Use of rinse aidDo these steps to fill the rinse aid dispenser Loading cutlery and dishes Adjusting the dosage of rinse aidHelpful hints and tips Maximum height of the dishes Use of detergentUpper position Lower positionDo these steps when the drying results are not satisfactory Setting and starting a washing programmeCancelling a washing programme Use of detergent tabletsCleaning the filters Care and cleaningInterrupting a washing programme End of the washing programmeFrost precautions External cleaningFault code and malfunction Possible cause and solutionCleaning results are not satisfactory Technical dataEnvironment concerns Adjusting the level of the appliance InstallationWater connection Water inlet hoseElectrical connection 156985570-00-042009