Zanussi ZDT41 Use of detergent, Maximum height of the dishes, Upper position, Lower position

Page 9

12

Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, remove it.

1

2

Arrange the items to let

For longer items fold the

water touch all surfaces.

cup racks up.

Prevent to put plates in the first three sections in the front part of the upper basket. Make sure the plates

tilt forward.

Adjustment of the height of the upper basket

If you put large plates in the lower basket, first move the upper basket to a upper position.

Use of detergent

Warning! Adjust the height before you load the upper basket.

Maximum height of the dishes in :

 

upper basket

lower basket

Upper position

20 cm

31 cm

Lower position

24 cm

27 cm

12

Do these steps to move the upper basket to the upper or lower position:

1.Move the front runner stops (A) out.

2.Pull the basket out.

3.Put the basket in the upper or lower position.

4.Replace the front runner stops (A) in their initial po- sition.

Caution! If the basket is in the upper position, do not put cups on the cup racks.

Only use detergents (powder, liquid or tablet) that are applicable for dishwashers.

Follow the data on the packaging:

• Dosage recommended by the manufacturer.

• Storage recommendations.

Do not use more than the correct quantity of deter- gent to save an environment.

12

9

Image 9
Contents ZDT41 Safety information ContentsContact your local Service Force Centre Programme selection/cancel buttonIndicator light Control panelProgramme indicator lights a and B Setting modeAudible signals Washing programmesSetting the water softener Use of the applianceConsumption values Electronic adjustment Manual adjustmentWater hardness setting Manually Use of dishwasher saltUse of rinse aid Important! Fill the salt container from time to timeDo these steps to fill the rinse aid dispenser Adjusting the dosage of rinse aid Loading cutlery and dishesHelpful hints and tips Maximum height of the dishes Use of detergentUpper position Lower positionDo these steps when the drying results are not satisfactory Setting and starting a washing programmeCancelling a washing programme Use of detergent tabletsCleaning the filters Care and cleaningInterrupting a washing programme End of the washing programmeFrost precautions External cleaningFault code and malfunction Possible cause and solutionTechnical data Cleaning results are not satisfactoryEnvironment concerns Adjusting the level of the appliance InstallationWater connection Water inlet hoseElectrical connection 156985570-00-042009