Zanussi ZDT41 manual Use of dishwasher salt, Manual adjustment, Electronic adjustment

Water hardness

°dH	°TH	mmol/l	Clarke
51 - 70	91 - 125	9,1 - 12,5	64 - 88
43 - 50	76 - 90	7,6 - 9,0	53 - 63
37 - 42	65 - 75	6,5 - 7,5	46 - 52
29 - 36	51 - 64	5,1 - 6,4	36 - 45
23 - 28	40 - 50	4,0 - 5,0	28 - 35
19 - 22	33 - 39	3,3 - 3,9	23 - 27
15 - 18	26 - 32	2,6 - 3,2	18 - 22
11 - 14	19 - 25	1,9 - 2,5	13 - 17
4 - 10	7 - 18	0,7 - 1,8	5 - 12
< 4	< 7	< 0,7	< 5

1) No use of salt required.

Water hardness setting

manually	electronically
2	10
2	9
2	8
2	7
2	6
2	5
1	4
1	3
1	2
11)	11)

You must set the water softener manually and elec- tronically.

Manual adjustment

The appliance is set at the factory at position 2.

12

Set switch to position 1 or 2.

Electronic adjustment

The water softener is set at the factory at level 5.

1.Switch on the appliance.

2.Make sure that the appliance is in setting mode.

3.Press and hold the programme selection/cancel but- ton.

4.Release the programme selection/cancel button when programme indicator light A starts to flash and programme indicator light B comes on.

5.Wait until programme indicator light B goes off.

–Programme indicator light A starts to flash.

–The end indicator light starts to flash.

6.Press the programme selection/cancel button one time.

–Programme indicator light A starts to flash.

–The setting function of the water softener is acti- vated.

–The end indicator light flashes to show the level of the water softener.

Example: 5 flashes, pause, 5 flashes, pause, etc...

= level 5.

7.Press the programme selection/cancel button one time to increase the water softener level by one step.

8.Press the on/off button to save the operation.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause

damage to the water softener.

6