Zanussi ZCM 610, ZCM 600 manual Something not working, Service and Spare Parts, Symptom Solution

Page 18

Something not working

If the aplliance is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

 

SYMPTOM

SOLUTION

 

ν There is no spark when lighting the gas

υ Check that the unit is plugged in and the electrical

 

supply is switched on

 

 

υ Check that the RCCB has not tripped (if fitted)

 

 

υ Check the mains fuse has not blown

 

 

υ Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

ν The gas ring burns unevenly

υ Check the main jet is not blocked and the burner

 

 

crown is clear of food particles.

 

 

υ Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

ν The oven does not come on

υ Check the oven is in manual operation and that

 

both a cooking function and temperature have been

 

 

 

 

selected.

 

 

υ Check the oven is wired in properly, and the socket

 

 

switch or the switch from the mains supply to the oven

 

 

are ON.

 

 

 

 

ν The oven temperature light does not come on

υ Select a temperature with the thermostat control

 

 

knob

 

 

υ Select a function with the oven function control

 

 

knob.

 

 

 

 

ν The oven light does not come on

υ Check the light bulb, and replace it if necessary

 

(see "Replacing the Oven Light")

 

 

 

 

 

 

ν It takes too long to finish the dishes, or they are

υ The temperature may need adjusting

 

cooked too fast.

 

 

 

 

 

 

ν Steam and condensation settle on the food and the

υ Refer to the contents of this booklet, especially to

 

oven cavity.

the chapter “Using the Oven”.

 

υ Leave dishes inside the oven no longer than 15-20

 

 

 

 

minutes after the cooking is completed.

 

 

 

 

ν The timer does not work

υ Check the instructions for the timer.

 

 

 

 

ν The oven fan is noisy

υ Check the grease filter is correctly fitted.

 

 

 

 

υ Check that shelves and bakeware are not vibrating

 

 

in contact with the oven back panel.

 

 

 

Service and Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the following pages.

Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working.”When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code

2.Your telephone number

3.Clear and concise details of the fault

4.The model and serial number of the appliance (found on the rating plate)

5.The purchase date

18

Image 18
Contents Mixed Fuel Cooker Important Safety Information Contents Guide to Use the instructionsDescription of the Cooker Fitting the Splash back only in model ZCM 610Accessories Control PanelOven Cavity Before the First Use of the Cooker InstallationWhen the Cooker is First Installed ControlsElectric Oven Oven Function Control KnobThermostat Control Knob Hour Clock and Timer Set the time of dayTimer To cancel the timerThings to note Cookware Using the OvenHints and Tips Condensation and steam Effects of dishes on cooking resultsHow to Use the Fan Oven Using the Fan OvenCooking Chart Things to NoteRoasting Chart Hints and TipsHints and Tips How to Use DefrostingDefrosting Always Cook Thoroughly Immediately After ThawingHow to Use the Grill GrillingPan Supports Maintenance and CleaningHob Top BurnersCleaning the Oven Cleaning materialsExternal cleaning Oven lamp replacement Oven ShelvesService and Spare Parts Symptom SolutionSomething not working Customer Care Department Guarantee ConditionsZanussi guarantee conditions Customer Care DepartmentNorthernireland Midlands Instructions for the Installer Important Safety RequirementsPositioning the Cooker Positioning the Appliance FigConnecting to Gas Fitting the Stability Bracket Not suppliedElectrical connections Permanent ConnectionThis Cooker Must be Earthed Procedure Pressure TestingCommissioning To adjust the gas rate Conversion from Natural Gas to LPGMethod Customer Care

ZCM 600, ZCM 610 specifications

The Zanussi ZCM 610 and ZCM 600 are two impressive freestanding cookers that represent Zanussi's commitment to blending functionality, efficiency, and style in the kitchen. Both models exemplify modern cooking solutions with features that cater to the needs of various home chefs, from amateurs to seasoned professionals.

Starting with the ZCM 610, this model is equipped with a spacious 62-liter oven capacity that provides ample room for baking, roasting, and grilling. The oven utilizes a fan-assisted cooking system that ensures even heat distribution, resulting in consistent cooking results every time. An excellent feature of the ZCM 610 is its versatile cooking modes, which include traditional cooking, grill settings, and fan-assisted baking, allowing users to experiment with their culinary skills.

In contrast, the Zanussi ZCM 600 is slightly more compact but does not compromise on performance. It offers a generous 50-liter oven capacity and includes similar fan-assisted technology that guarantees evenly cooked dishes. The ZCM 600 is designed with a gas hob that features four burners, giving users optimal control over their cooking. The burners come in various sizes, accommodating everything from small saucepans to larger frying pans and pots, which makes it an ideal choice for families or individuals with multiple cooking needs.

Both models boast essential safety features, such as flame failure devices that automatically cut off the gas supply if the flame is extinguished unexpectedly. This addition ensures a safer cooking environment, a primary concern for many households.

The design of these cookers reflects Zanussi's dedication to modern aesthetics and user convenience. Featuring a clean, stainless-steel finish, the ZCM 610 and ZCM 600 can easily integrate into any kitchen décor. The control knobs are strategically positioned for ease of use, complementing the users’ cooking experience.

Additionally, both the ZCM 610 and ZCM 600 are energy-efficient products, promoting eco-conscious cooking without compromising power. Their energy ratings contribute to reduced electricity bills and a smaller carbon footprint, aligning with today's growing emphasis on sustainability.

In conclusion, the Zanussi ZCM 610 and ZCM 600 are excellent choices for anyone looking for reliable, efficient, and stylish cooking appliances. Their combination of advanced features and robust design makes them invaluable partners in any culinary endeavor. Whether it's everyday meals or special occasions, these cookers deliver performance that meets the demands of a modern kitchen.