Zanussi ZCM 610, ZCM 600 Before the First Use of the Cooker, Controls, Hob burners, Installation

Page 6

Before the First Use of the Cooker

INSTALLATION

Any gas installation must be carried out by a CORGI registered installer, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE COOKER IS FIRST INSTALLED

Once the cooker has been installed, it is important to remove any protective materials, which were put on in the factory.

Remove all packaging, both inside and outside the cooker, before using it.

Before first use, the oven should be heated without food.

During this time, an unpleasant odour may be emitted.

This is quite normal.

1.Set the electronic timer to manual function.

2.Switch the oven function control knob to fan cooking

.

3.Set the thermostat control knob to MAX.

4.Open a window for ventilation.

5.Allow the oven to run empty for approximately 45 minutes.

This procedure should be repeated with the grill function for approximately 5-10 minutes.

Controls

Hob burners

ΦTo light a burner:

-turn the relevant control knob anticlockwise to maximum position.

-At the same time push the electric ignition button which is marked with a little spark.

-Then adjust the flame as required.

If the burner does not ignite, turn the control knob to zero, and try again.

When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically.

If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the pan, causing the handle to overheat.

6

Image 6
Contents Mixed Fuel Cooker Important Safety Information Contents Guide to Use the instructionsDescription of the Cooker Fitting the Splash back only in model ZCM 610Accessories Control PanelOven Cavity Before the First Use of the Cooker InstallationWhen the Cooker is First Installed ControlsElectric Oven Oven Function Control KnobThermostat Control Knob Hour Clock and Timer Set the time of dayTimer To cancel the timerThings to note Cookware Using the OvenHints and Tips Condensation and steam Effects of dishes on cooking resultsHow to Use the Fan Oven Using the Fan OvenCooking Chart Things to NoteRoasting Chart Hints and TipsHints and Tips How to Use DefrostingDefrosting Always Cook Thoroughly Immediately After ThawingHow to Use the Grill GrillingPan Supports Maintenance and CleaningHob Top BurnersCleaning the Oven Cleaning materialsExternal cleaning Oven lamp replacement Oven ShelvesService and Spare Parts Symptom SolutionSomething not working Customer Care Department Guarantee ConditionsZanussi guarantee conditions Customer Care DepartmentNorthernireland Midlands Instructions for the Installer Important Safety RequirementsPositioning the Cooker Positioning the Appliance FigConnecting to Gas Fitting the Stability Bracket Not suppliedElectrical connections Permanent ConnectionThis Cooker Must be Earthed Procedure Pressure TestingCommissioning To adjust the gas rate Conversion from Natural Gas to LPGMethod Customer Care

ZCM 600, ZCM 610 specifications

The Zanussi ZCM 610 and ZCM 600 are two impressive freestanding cookers that represent Zanussi's commitment to blending functionality, efficiency, and style in the kitchen. Both models exemplify modern cooking solutions with features that cater to the needs of various home chefs, from amateurs to seasoned professionals.

Starting with the ZCM 610, this model is equipped with a spacious 62-liter oven capacity that provides ample room for baking, roasting, and grilling. The oven utilizes a fan-assisted cooking system that ensures even heat distribution, resulting in consistent cooking results every time. An excellent feature of the ZCM 610 is its versatile cooking modes, which include traditional cooking, grill settings, and fan-assisted baking, allowing users to experiment with their culinary skills.

In contrast, the Zanussi ZCM 600 is slightly more compact but does not compromise on performance. It offers a generous 50-liter oven capacity and includes similar fan-assisted technology that guarantees evenly cooked dishes. The ZCM 600 is designed with a gas hob that features four burners, giving users optimal control over their cooking. The burners come in various sizes, accommodating everything from small saucepans to larger frying pans and pots, which makes it an ideal choice for families or individuals with multiple cooking needs.

Both models boast essential safety features, such as flame failure devices that automatically cut off the gas supply if the flame is extinguished unexpectedly. This addition ensures a safer cooking environment, a primary concern for many households.

The design of these cookers reflects Zanussi's dedication to modern aesthetics and user convenience. Featuring a clean, stainless-steel finish, the ZCM 610 and ZCM 600 can easily integrate into any kitchen décor. The control knobs are strategically positioned for ease of use, complementing the users’ cooking experience.

Additionally, both the ZCM 610 and ZCM 600 are energy-efficient products, promoting eco-conscious cooking without compromising power. Their energy ratings contribute to reduced electricity bills and a smaller carbon footprint, aligning with today's growing emphasis on sustainability.

In conclusion, the Zanussi ZCM 610 and ZCM 600 are excellent choices for anyone looking for reliable, efficient, and stylish cooking appliances. Their combination of advanced features and robust design makes them invaluable partners in any culinary endeavor. Whether it's everyday meals or special occasions, these cookers deliver performance that meets the demands of a modern kitchen.