Zanussi ZCM 610, ZCM 600 manual Fitting the Stability Bracket Not supplied, Connecting to Gas

Page 24

 

 

300 mm.

 

 

WALL FACE

 

 

 

 

 

 

 

BACK OF COOKER

580 mm.

mm.

 

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

 

STABILITY BRACKET

 

100

 

 

 

 

 

 

 

 

A

BASE OF COOKER

 

 

 

 

 

PENCIL LINE ON THE FLOOR

 

 

 

 

 

295 mm.

 

 

 

PLAN VIEW OF THE COOKER

 

SIDE VIEW

FO 0179

 

OF THE COOKER

 

 

 

 

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See "Important Safety Requirements").

If a stability bracket should be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 17) and remove cooker from its position. Mark off 580mm (23") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig. 3. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

If using different types of gas bayonet connection, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Mixed Fuel Cooker Important Safety Information Contents Guide to Use the instructionsDescription of the Cooker Fitting the Splash back only in model ZCM 610Accessories Control PanelOven Cavity Installation When the Cooker is First InstalledBefore the First Use of the Cooker ControlsElectric Oven Oven Function Control KnobThermostat Control Knob Hour Clock and Timer Set the time of dayTimer To cancel the timerThings to note Using the Oven Hints and Tips Condensation and steamCookware Effects of dishes on cooking resultsUsing the Fan Oven Cooking ChartHow to Use the Fan Oven Things to NoteRoasting Chart Hints and TipsHow to Use Defrosting DefrostingHints and Tips Always Cook Thoroughly Immediately After ThawingHow to Use the Grill GrillingMaintenance and Cleaning Hob TopPan Supports BurnersCleaning the Oven Cleaning materialsExternal cleaning Oven lamp replacement Oven ShelvesService and Spare Parts Symptom SolutionSomething not working Guarantee Conditions Zanussi guarantee conditionsCustomer Care Department Customer Care DepartmentNorthernireland Midlands Instructions for the Installer Important Safety RequirementsPositioning the Cooker Positioning the Appliance FigConnecting to Gas Fitting the Stability Bracket Not suppliedElectrical connections Permanent ConnectionThis Cooker Must be Earthed Procedure Pressure TestingCommissioning To adjust the gas rate Conversion from Natural Gas to LPGMethod Customer Care

ZCM 600, ZCM 610 specifications

The Zanussi ZCM 610 and ZCM 600 are two impressive freestanding cookers that represent Zanussi's commitment to blending functionality, efficiency, and style in the kitchen. Both models exemplify modern cooking solutions with features that cater to the needs of various home chefs, from amateurs to seasoned professionals.

Starting with the ZCM 610, this model is equipped with a spacious 62-liter oven capacity that provides ample room for baking, roasting, and grilling. The oven utilizes a fan-assisted cooking system that ensures even heat distribution, resulting in consistent cooking results every time. An excellent feature of the ZCM 610 is its versatile cooking modes, which include traditional cooking, grill settings, and fan-assisted baking, allowing users to experiment with their culinary skills.

In contrast, the Zanussi ZCM 600 is slightly more compact but does not compromise on performance. It offers a generous 50-liter oven capacity and includes similar fan-assisted technology that guarantees evenly cooked dishes. The ZCM 600 is designed with a gas hob that features four burners, giving users optimal control over their cooking. The burners come in various sizes, accommodating everything from small saucepans to larger frying pans and pots, which makes it an ideal choice for families or individuals with multiple cooking needs.

Both models boast essential safety features, such as flame failure devices that automatically cut off the gas supply if the flame is extinguished unexpectedly. This addition ensures a safer cooking environment, a primary concern for many households.

The design of these cookers reflects Zanussi's dedication to modern aesthetics and user convenience. Featuring a clean, stainless-steel finish, the ZCM 610 and ZCM 600 can easily integrate into any kitchen décor. The control knobs are strategically positioned for ease of use, complementing the users’ cooking experience.

Additionally, both the ZCM 610 and ZCM 600 are energy-efficient products, promoting eco-conscious cooking without compromising power. Their energy ratings contribute to reduced electricity bills and a smaller carbon footprint, aligning with today's growing emphasis on sustainability.

In conclusion, the Zanussi ZCM 610 and ZCM 600 are excellent choices for anyone looking for reliable, efficient, and stylish cooking appliances. Their combination of advanced features and robust design makes them invaluable partners in any culinary endeavor. Whether it's everyday meals or special occasions, these cookers deliver performance that meets the demands of a modern kitchen.
Top Page Image Contents