Sangean Electronics DDR-31+ Presetting stations DAB and FM, Recalling a preset station DAB and FM

Page 15

Presetting stations - DAB and FM

There are 5 memory presets on the panel for each of the 2 wavebands. However, There are 10 memory presets on the remote control for each of the 2 wavebands.

1.Press and release the On / StandBy button switch on the radio.

2.Tune to the required station as previously described.

3.Press and hold down the required Preset button until the display shows e.g. “Preset 1 stored”. The station will be stored under the chosen preset button. Repeat this procedure for the remaining presets.

4.Stations stored in preset memories may be overwritten by following the above procedure.

Recalling a preset station - DAB and FM

1.Press and release the On / StandBy button to switch on the radio.

2.Select the required waveband by pressing the Band button.

3.Momentarily press and release the required Preset button, your radio will tune to the station stored in preset memory.

Image 15

Contents Page Contents Controls front Controls rear Controls remote control Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Finding new radio stations DAB Secondary services DABManual Tuning DAB Dynamic Range Control DRC DAB Operating your radio FM auto-tune Manual tuning FMDisplay modes FM Recalling a preset station DAB and FM Presetting stations DAB and FMScan sensitivity setting Stereo / Mono setting FM Clock display Setting the time and the date manually Page Page Page Setting the alarm times Page Page Page Canceling alarms Stop the alarmSleep timer EQ function Bass control Treble controlDisplay backlight dimmer Mute functionFactory reset Software version USB socket for software upgrade Headphone socketAuxiliary Input socket Line Out socket Power Requirements Specifications Circuit Features