Sangean Electronics DDR-31+ manual Scan sensitivity setting

Page 16

Scan sensitivity setting

Your radio will normally scan for FM broadcasts which are strong enough to give good reception. However, you may wish the Scan function to also be able to find weaker signals, possible from more distant radio transmitters. Your radio includes a local / distant option for the Scan function in the FM band.

1.Switch on your radio and select FM band by pressing Band button.

2.Press and release the Advanced button. The display will show “FM scan zone”.

3.Press and release the Select button to enter FM Scan Zone set.

4.Press the Tuning Up or Down buttons to switch between Local and Distant options. The distant option will allow the radio to find weaker signals when scanning.

5.Press and release the Select button to confirm your selection. The Local or Distant setting is stored in the radio and remains in force until changed or until a Factory Reset.

Note:

The local setting causes the radio to ignore weak signals.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Contents Controls front Controls rear Controls remote control Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Secondary services DAB Finding new radio stations DABManual Tuning DAB Dynamic Range Control DRC DAB Manual tuning FM Operating your radio FM auto-tuneDisplay modes FM Presetting stations DAB and FM Recalling a preset station DAB and FMScan sensitivity setting Stereo / Mono setting FM Clock display Setting the time and the date manually Page Page Page Setting the alarm times Page Page Page Stop the alarm Canceling alarmsSleep timer EQ function Treble control Bass controlMute function Display backlight dimmerFactory reset Software version Headphone socket USB socket for software upgradeAuxiliary Input socket Line Out socket Specifications Circuit Features Power Requirements
Top Page Image Contents