Operating your radio - DAB
1.Fully extend the telescopic aerial. Fully extend the telescopic aerial located on the rear of your clock radio. Place the telescopic antenna so that it is as vertical as possible extending either above or below the radio.
2.Insert the adaptor plug into the DC socket located on the rear of your clock radio. Plug the adaptor into a standard mains outlet.
The display will show “Welcome to Digital Radio” for a few seconds and then the display will show “Time is not set”. (If the radio has been used before the radio is to find a clock radio stations. After a while the current time will appear on the display.)
3.Press and release the On / StandBy button to switch on your clock radio.
4.During the scanning process, the lower line of the display shows a
5.If the radio has been used before, the last used station will be selected.
6.When the scanning is completed the first station (in
7.If this is the first time that the radio has not been used, then the first station in the list of stations found during scanning will be played. The display will show the station name on the display.
8.If the station list is still empty after the Auto tune your clock radio will display “No DAB Station”.
9.If no signals are found it may be necessary to relocate your clock radio to a position giving better reception.
GB
6