Sangean Electronics DDR-31+ Setting the time and the date manually

Page 19

Setting the time and the date manually

The DDR-31 Plus will automatically set its clock when tuned to a DAB radio station or to an FM station which is broadcasting the time via RDS.

If the clock cannot be set using DAB or FM radio then you will need to set the time and the date manually before the alarm function can be used. The time and the date may be set while the unit is in StandBy mode or while playing.

If it becomes necessary to set the time and the date manually, please follow these steps:

1.Press and release the On / StandBy button to switch on the radio.

2.Select the required waveband by pressing the Band button.

3.Press and release the Advanced button. The display will show “FM scan zone”.

4.Press the Tuning Up or Down buttons to switch “System”.

5.Press and release the Select button to enter the Time menu.

6.Press and release the Select button to enter the “Set 12/24 hour“ menu.

7.Press the Tuning Up or Down buttons to switch the “Set 12/24 hour“.

8.Press and release the Select button to confirm your selection. The 12/24 hour setting is stored in the radio.

9.Press the Tuning Up or Down buttons to switch the “Set Time/Date“.

10.Press and release the Select button to enter the “Set Time/Date“ menu.

GB

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Contents Controls front Controls rear Controls remote control Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Finding new radio stations DAB Secondary services DABManual Tuning DAB Dynamic Range Control DRC DAB Operating your radio FM auto-tune Manual tuning FMDisplay modes FM Recalling a preset station DAB and FM Presetting stations DAB and FMScan sensitivity setting Stereo / Mono setting FM Clock display Setting the time and the date manually Page Page Page Setting the alarm times Page Page Page Canceling alarms Stop the alarmSleep timer EQ function Bass control Treble controlDisplay backlight dimmer Mute functionFactory reset Software version Headphone socket USB socket for software upgradeAuxiliary Input socket Line Out socket Power Requirements Specifications Circuit Features
Top Page Image Contents