Yamaha RX-V863 owner manual 101 En, Zone 2 settings FZONE2 SET, Notes

Models: RX-V863

1 152
Download 152 pages 12.95 Kb
Page 105
Image 105
■Zone 2 settings F)ZONE2 SET

HDMI set E)HDMI SET

Use this feature to select the component to play back HDMI audio signals.

E)HDMI SET

S. AUDIO;;;;;RX-V863

[p]/[[]: Select

[ENTER]: Return

Support audio S.AUDIO

Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

Choice

Functions

 

 

RX-V863

Plays back HDMI audio signals on this unit. The

 

HDMI audio signals input at the HDMI input

 

jacks of this unit are not output to the HDMI

 

component connected to the HDMI OUT jack on

 

the rear panel of this unit.

 

 

OTHER

Plays back HDMI audio signals on another

 

HDMI component connected to the HDMI OUT

 

jack.

 

 

Notes

This unit transmits audio and video signals input at the HDMI input jacks to the HDMI out jack only when this unit is turned on even if “S.AUDIO” is set to “OTHER”.

Available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component.

Customizing this unit (MANUAL SETUP)

Zone 2 settings F)ZONE2 SET

F)ZONE2 SET

. MAX VOL.;;;+16.5dB INIT. VOL.;;;;;OFF

[[

p

Up/Down

[p]/[[]: Adjust

Zone 2 Maximum volume MAX VOL.

Use this feature to set the maximum volume level in the Zone 2.

Control range: – 30.0 dB to +15.0 dB, +16.5 dB

Control step: 5.0 dB

Notes

The “MAX VOL.” setting takes priority over the “INI.VOL.” setting. For example, when “INI.VOL.” is set to –20.0 dB and then “MAX VOL.” is set to –30.0 dB, the volume level is automatically set to –30.0 dB when you turn on the power of this unit next time.

The “MAX VOL.” setting does not affect the output level at the “ZONE 2 OUT” jacks.

Zone 2 Initial volume INI.VOL.

Use this feature to set the volume level of Zone 2 when the power of this unit is turned on.

Choices: OFF, MUTE, –80.0 dB to +16.5 dB

Control step: 0.5 dB

Notes

The “MAX VOL.” setting takes priority over the “INI.VOL.” setting.

When you select “FRONT B”, “PRNS”, “Zone B”, or “NONE” in “EXTRA SP ASSIGN” (see page 87), “Zone 2 SP Not Assigned” appears in the OSD and the “ZONE2 SET” parameter is not available.

The “INI.VOL.” setting does not affect the output level at the

“ZONE 2 OUT” jacks.

OPERATION

ADVANCED

 

 

English

101 En

Page 105
Image 105
Yamaha RX-V863 owner manual 101 En, Zone 2 settings FZONE2 SET, Notes