Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4SIRIUS.
Setting the SIRIUS Satellite Radio™ preset channels
You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 66.
1Search for a channel you want to set as a preset channel by using one of the SIRIUS Satellite Radio search modes.
See “Basic SIRIUS Satellite Radio™ operations” on page 65 for details.
SIRIUS Satellite Radio™ tuning
y
You can select the preset station group (A to E) by pressing
DA/B/C/D/E (or
4Press FMEMORY (or 9MEMORY) to set the selected SIRIUS Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.
A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.
A1:023 Hair Na
Colon (:)
Note
Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.
001 SIRIUS Hit
Currently selected channel number
2Press FMEMORY (or 9MEMORY).
The MEMORY indicator flashes in the front panel display for approximately 30 seconds.
MEMORY
Flashes
Note
You must proceed to and carry out steps 3 through 4 while the MEMORY indicator is flashing in the front panel display.
3Press EPRESET/TUNING/CH l / h
(or 8PRESET/CH k/ n) repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel display.
Flashes
MEMORY
A1
Currently selected preset channel group and number
Setting the Parental Lock
You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels. This unit automatically skips the locked channels when this unit is in the All Channel Search mode or Category Search mode and you search a channel by pressing EPRESET/ TUNING/CH l/ h(or 8PRESET/CH k/ n).
■Setting the code number and the locked
channels
Use this feature to set the Parental Lock code number (PIN) and select the channels to be locked.
1Set the operation mode selector to FAMP on the remote control and then press ISET MENU to display.
2Press 8n to select “MANUAL SETUP” and then press 8ENTER.
3Press 8n repeatedly to select “INPUT
MENU” and then press 8ENTER.
English
