Connecting the FM and AM antennas
Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals. In general, these antennas should provide sufficient signal strength.
Notes
•The AM loop antenna should be placed away from this unit.
•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas.
•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.
Indoor FM | AM loop antenna |
antenna | (supplied) |
(supplied)
(U.S.A. model)
|
| 1 | 2 | 3 | 4 | 5 |
SIRIUS | XM | DIGITAL | OPTICAL | DIGITAL INPUT | COAX | |
OUTPUT |
|
| ||||
|
|
|
| FRONT B/ZONE B/ |
| |
|
|
|
| ZONE 2/PRESENCE |
| |
|
|
|
| R EXTRA SP L | R | |
FM |
| GND AM |
|
|
| |
75Ω UNBAL. |
|
|
| |||
| HD Radio |
|
|
|
| |
| ANTENNA |
|
|
|
| |
| REMOTE | TRIGGER |
|
|
| |
|
|
| OUT |
|
|
|
Outdoor AM antenna
Use a 5 to 10 m (16 to 33 ft)
Ground (GND terminal)
For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
Connections
Connecting the wire of the AM loop antenna
(U.S.A. model)
Press and hold | Insert | Release |
(Canada model)
Open the lever | Insert | Close the lever |
y
The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal.
Assembling the supplied AM loop antenna
(U.S.A. model)
(Canada model)
PREPARATION
English
