Caution: Read this before operating your unit.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

other components, as they may cause damage and/or discoloration on the surface of this unit.

burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press LSYSTEM OFF to set this unit to the standby mode, and then disconnect the AC power plug from the AC wall outlet.

19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are:

Asia model ............................ 220/230–240 V AC, 50/60 Hz General model ........ 110/120/220/230–240 V AC, 50/60 Hz

20The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

21Excessive sound pressure from earphones and headphones can cause hearing loss.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by LSYSTEM OFF. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

Caution-iii En

Page 4
Image 4
Yamaha RX-V863 owner manual For Canadian Customers, Pour LES Consommateurs Canadiens, Serial No

RX-V863 specifications

The Yamaha RX-V863 is a versatile and powerful AV receiver designed for home theater enthusiasts who want to enjoy an immersive audio-visual experience. This model is part of Yamaha's RX series, known for its robust performance and user-friendly features.

One of the standout features of the RX-V863 is its support for high-definition audio formats. It is equipped with advanced digital signal processing (DSP) technology that delivers exceptional sound quality. The receiver supports Dolby TrueHD and DTS-HD Master Audio, providing a cinematic audio experience that captures every detail in movies and music.

The RX-V863 also offers 7.1-channel surround sound, which adds depth and dimension to audio playback. With 110 watts per channel, it can drive a variety of speaker setups effectively, filling a room with rich sound. Its YPAO (Yamaha Parametric Room Acoustic Optimizer) technology analyzes the room's acoustics and automatically calibrates the audio settings for optimal performance. This ensures that listeners enjoy the best sound possible, regardless of their room's layout.

Connectivity options are ample on the RX-V863, featuring multiple HDMI inputs that support 1080p video pass-through, enabling seamless connectivity with high-definition sources. This makes it an ideal choice for users with various devices like Blu-ray players, gaming consoles, and streaming devices. The receiver also includes component and composite video inputs, as well as optical and coaxial digital audio inputs, ensuring compatibility with a wide range of equipment.

Furthermore, the RX-V863 boasts superior video processing capabilities, able to upscale standard-definition video to 1080p. This enhances the picture quality of older sources, making them look more impressive on modern HDTVs. Additionally, its Zone 2 functionality allows for multi-room audio distribution, letting users enjoy music in different spaces.

To enhance usability, the receiver comes with a well-designed remote control and an on-screen display. Yamaha's intuitive interface makes it easy to navigate settings and options.

In summary, the Yamaha RX-V863 is a robust AV receiver that combines high-quality audio performance, extensive connectivity, and user-friendly features. Whether you are watching movies, listening to music, or gaming, the RX-V863 ensures an enhanced entertainment experience that caters to audiophiles and casual users alike.