Yamaha RX-V863 90 En, Speaker distance CSP Distance, Unit for the speaker distance adjustment

Customizing this unit (MANUAL SETUP)

■Speaker distance C)SP DISTANCE

Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.

	C)SP DISTANCE			1/2	C)SP DISTANCE			2/2
	. UNIT;;;;;;;;feet				. SBL;;;;;;;;8.0ft
	FRONT L;;;10.0ft
	FRONT R;;;10.0ft				SBR;;;;;;;;8.0ft
	CENTER;;;;;8.5ft				SWFR;;;;;;;10.0ft
	SUR. L;;;;;8.0ft				PRNS L;;;;;10.0ft
	SUR. R;;;;;8.0ft				PRNS R;;;;;10.0ft
[[		p	Up/Down		[[	p	Up/Down
	[p]/[[]: Select				[p]/[[]: Adjust
Unit for the speaker distance adjustment								UNIT

Initial setting:

[U.S.A. and Canada models]: feet (ft)

[Other models]: meters (m)

ChoiceFunctions

meters (m) Adjusts speaker distances in meters.

feet (ft) Adjusts speaker distances in feet.

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft) Initial setting:

FRONT L/FRONT R/SWFR/PRNS L/PRNS R: 3.00 m (10.0 ft)

CENTER: 2.60 m (8.5 ft)

SUR. L/SUR. R/SBL/SBR: 2.40 m (8.0 ft)

SP DISTANCE	Adjusted speaker
FRONT L	Front left speaker
FRONT R	Front right speaker
CENTER	Center speaker
SUR. L	Surround left speaker
SUR. R	Surround right speaker
SBL	Surround back left speaker
SBR	Surround back right speaker
SWFR	Subwoofer
PRNS L	Presence left speaker
PRNS R	Presence right speaker

Notes

•The available speaker channels differ depending on the setting of the speakers.

•Instead of “SBL” and “SBR”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 88).

■Test tone D)TEST TONE

Turns the test tone output on or off for the “SPEAKER SET”, “SP LEVEL”, and “SP DISTANCE” settings.

	D)TEST TONE
	>OFF ON
	[p]/[[]: Select
	[ENTER]: Return
Choice	Functions
OFF	This unit does not output the test tone for the
	“SPEAKER SET”, “SP LEVEL”, and “SP
	DISTANCE” settings.
ON	This unit outputs the test tone for the
	“SPEAKER SET”, “SP LEVEL”, and “SP
	DISTANCE” settings.

y

If you use a handheld sound pressure level meter, hold at arm’s length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.

Note

This function is automatically turned off if you exit from “BASIC MENU”.

90 En