Sangean Electronics DDR-31+ manual

Page 25

17. The alarm day digits on the display will flash. Press the Tuning Up or Down buttons until the desired the alarm day is set. There are four “Alarm day“ options as Once, Weekends, Weekdays,

and Daily.

18. Press and release the Select button to confirm your selection. The alarm day setting is stored in the radio.

19. The lower line of the display will show a bar-graph indicating sound level of the alarm. Press the Tuning Up or Down buttons until the desired volume is set.

Note:

The default minimum volume level of the alarm is one.

20.Press and release the Select button to confirm your selection. The alarm volume setting is stored in the radio.

21.The alarm setup digits on the display will flash. Press the Tuning Up or Down buttons to switch the alarm setup digits as needed.

There are two “Alarm Setup“ options as On and Off.

GB

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Contents Controls front Controls rear Controls remote control Mains operation Operating your radio DAB Selecting a station DAB Display modes DAB Finding new radio stations DAB Secondary services DABManual Tuning DAB Dynamic Range Control DRC DAB Operating your radio FM auto-tune Manual tuning FMDisplay modes FM Recalling a preset station DAB and FM Presetting stations DAB and FMScan sensitivity setting Stereo / Mono setting FM Clock display Setting the time and the date manually Page Page Page Setting the alarm times Page Page Page Canceling alarms Stop the alarmSleep timer EQ function Bass control Treble controlDisplay backlight dimmer Mute functionFactory reset Software version Headphone socket USB socket for software upgradeAuxiliary Input socket Line Out socket Power Requirements Specifications Circuit Features
Top Page Image Contents