Sherwood RX-772 manual Listening in the desired tone mode, Adjusting the modes as desired

Listening in the desired tone mode

1. Select the desired tone mode.

�Each time this button is pressed, the tone mode changes as follows :

OFF : To listen to a program source without the � tone effect.

ON : To listen with the tone effect you adjusted.

2. Adjust the tone (treble and bass) as desired.

When adjusting the treble

�When you select the tone on mode, you can listen to a program source with the tone effect you adjusted.

�When pressing the TREBLE UP/DOWN(∧/∨) or BASS UP/DOWN(∧/∨) buttons, the tone level can be adjusted within the range of -10 ~ +10.

�Notes:

�Extreme settings at high volume may damage your speakers.

�In general, the bass and treble levels are adjusted to 0.

Adjusting the modes as desired

�You can adjust the speaker, the tone and the balance modes as desired.

1. Select the desired mode.

�Each time this button is pressed, the mode is displayed for several seconds and changes as follows :

� SPEAKER (�TONE : ON�BASS�TREBLE) or

BALANCE ( � TONE : OFF) �

2. Adjust the selected mode as desired.

�Each time the SELECT konb is rotated, you can adjust the selected mode as follows.

�Note :

�The mode display disappears, perform the above step 1 again.

13