Sherwood Guide to Connecting Speakers for Optimal Performance
Page 7

4. CONNECTING PRE OUTS or MAIN INS

•You can connect either a pre amplifier or a power amplifier to this receiver.

•To achieve higher sound quality, connect the MAIN IN jacks to the pre amplifier and connect the speakers to this receiver.

•To drive speakers with higher power output, connect the PRE OUT jacks to the power amplifier and connect it to speakers. �Note:

•When you do not use the MAIN IN and PRE OUT jacks, always connect these jacks with the supplied jumper plugs.

5. CONNECTING DIGI LINK

• Connect this jack to the DIGI LINK jack of Sherwood CD player such as CD-772, etc. that uses the DIGI LINK remote control system.

6. CONNECTING SPEAKERS

• Usally SPEAKER A terminals are used for only a pair of speakers. When you have another pair of speakers, SPEAKER B terminals can be used.

• Be sure to connect speakers firmly and correctly accord- ing to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass.

Notes :

•For safe amplifier operation, use the speakers with impedance of over 4Ω when you use only SPEAKER A or

B terminals and use the speakers with impedance of over 8Ω when you use both SPEAKER A and B terminals.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Page Read this Before Operating Your Unit IntroductionListening to RDS Broadcasts FM only Remote Control Operation RangeRDS Tuner Regional Option for some countries in Europe, etc System Connections Connecting AntennasConnecting Video and Audio Components Connecting PhonoConnecting Digi Link Connecting PRE Outs or Main INSConnecting Speakers AC Input Switched AC OutletFront Panel Controls System Remote Controls Front Panel & Remote ControlsInput Selector KNOB/BUTTONS Load two batteries AAA size, 1.5 V matching the polarity Remove the coverListening to a Program Source Standby mode, turn the power onSwitch the desired speakers on OperationsSelect the desired input source To listen with the headphonesTo mute the sound Adjusting the modes as desired Listening in the desired tone modeWhen adjusting the Speaker mode Select the tuner Auto tuningManual tuning Listening to Radio BroadcastsRepeat the above steps 1 to 3 to memorize other stations Presetting radio stationsListening to RDS Broadcasts FM only FM mode, select the RDS search modeRDS Search PTY Search FM mode, press the Search Mode button twiceTP Search FM mode, press the Search Mode button three timesRecording with Tape RecordingRecording with Video Adjusting the brightness of the fluorescent displays Operating the sleep timerOther Functions Problem Possible Cause Remedy Troubleshooting GuideAmplifier Section Specifications
Top Page Image Contents