Toastmaster AM24, AM36, AM48, AM36 & AM48 Toastmaster Manufacturer reserves the right

Page 3

IN CASE OF FIRE

1.De-energize griddle at disconnect switch. This will cut off power to the heating elements allowing griddle to cool. This reduces the flash point temperature making it easier to stop the fire.

2.Cover the affected area with a heavy blanket or canvas. Play the fire extinguisher nozzle over the blanket or cover to seal off air thus smothering the fire.

CAUTION:

Do not attempt to fight a grease fire by playing the nozzle of the fire extinguisher directly on the burning grease. The force will cause the burning grease to be sprayed to adjoining equipment making it difficult to contain the fire. Only use a fire extinguisher filled with CO2 which is for liquids and oils and suitable for electric powered equipment.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

This manual provides detailed information for installation and operation of your new Accu-Miser griddle. It also contains some information to assist the operator in diagnosing problems in the event of a malfunction. This manual is an important tool for the operator and should be kept readily available.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE

OR OTHER FLAMMABLE VAPORS OR LIQUIDS

IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE

NOTICE

Using any parts other than

genuine Toastmaster factory

parts relieves the

manufacturer of all liability.

NOTICE

Toastmaster (Manufacturer) reserves the right

to change specifications and product design

without notice. Such revisions do not entitle

the buyer to corresponding changes, im-

provements, additions or replacements for

previously purchased equipment.

ii

Image 3
Contents Toastmaster Toastmaster Without notice. Such revisions do not entitle To change specifications and product designProvements, additions or replacements for Toastmaster Manufacturer reserves the rightTable of Contents Infrared Heat Panels FeaturesACCU-MISER AM Series Griddles are ModelsComponent Location AM Series Griddles Specification Chart Griddle Electrical Specification Chart Griddle Dimension Drawing Description Leveling Griddle Installing Griddle on Counter Installing LegsInspect for Shipping Damage Unpacking GriddleStand Assembly Installing Griddle on Accessory StandGriddle Accessory Stand List Accessory DescriptionInstallation Electrical Connection Test the Installation, refer to Figure Initially Clean the GriddleInstallation Operator Components Location and Function of ControlsControls Control PanelSeasoning the Griddle Operating Hints and SafetyDaily Operation And Maintenance Daily Pre-Operation Daily Post-Operation Cleaning the Griddle SurfaceOperation Troubleshooting Food Control Time Advance Setting Minutes Preparations Time and Temperature GuideCooking Capacities Parts List Overall Exploded Drawing Item Qty Part Description Parts List for Overall Exploded DrawingParts List Schematics Schematics Schematics Schematics Schematics Schematics Schematics Toastmaster