Connecting the Water Supply

WARNING

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•Do not re-use compression fitting or use thread seal tape.

•A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.

CAUTION

To Avoid Property Damage:

•Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT

Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need:

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 30 and 100 psi.

•A water supply line made of ¼ inch (6.4mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

NOTE

Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/ state building codes, Frigidaire recommends for homes with existing valves its Smart Choice® water line kit 5305513409 (with

a 6 ft. Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice® water line kit 5305510264 (with a 20 ft. copper water line with self-tapping saddle valve). Please refer to www.frigidaire.com/store for more information.

To Connect Water Supply Line To Ice Maker Inlet Valve

1Disconnect refrigerator from electric power source.

2Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.

3Remove plastic cap from water valve inlet and discard cap.

4If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it will go (¼ inch/6.4 mm). Slide ferrule

(sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 1.

If you use stainless steel tubing - The nut and ferrule are already assembled on the tubing. Slide compression nut onto valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten. See Figure 2.

FFHS2622, FFHS2622MS3, FFSS2614QE, FFSS2614QS specifications

The Frigidaire FFSS2614QE and FFSS2614QS, as well as the FFHS2622MS3 and FFHS2622 models, stand out in the modern kitchen for their blend of performance, efficiency, and style. These refrigerators are designed to cater to a wide range of needs, featuring innovative technology and user-friendly characteristics that make food storage easier and more efficient.

The FFSS2614QE and FFSS2614QS models are both side-by-side refrigerators that provide a generous capacity, ensuring ample storage for groceries and household items. They incorporate a sleek design, available in classic white or stainless steel, adding a touch of elegance to any kitchen decor. One of their standout features includes the SpaceWise organization system, which optimizes interior space, offering adjustable shelving and door bins that can accommodate bottles and condiments of various sizes.

In terms of technology, both FFSS2614 models come equipped with a powerful cooling system that maintains consistent temperature levels, ensuring your food remains fresh longer. The Through-the-door ice and water dispenser is perfect for families, providing easy access to chilled refreshments and ice without having to open the fridge door, which can be particularly energy-efficient.

The FFHS2622MS3 and FFHS2622 models elevate functionality with their French door designs. These models offer wide shelves and a large freezer compartment, making them suitable for storing larger items or bulk groceries. Furthermore, they include features like the CrispSeal Crispers, which help maintain optimal humidity levels for fruits and vegetables, extending their freshness.

Both models incorporate advanced technology such as the Effortless Temperature Control, which allows users to easily adjust settings for the cooling compartments. Energy efficiency is another critical characteristic, as all models are designed to meet ENERGY STAR standards, ensuring reduced electricity consumption and environmental impact.

In summary, the Frigidaire FFSS2614QE, FFSS2614QS, FFHS2622MS3, and FFHS2622 refrigerators are ideal choices for modern households. They combine style, efficiency, and functionality, making food storage and management a seamless experience. Whether you prefer the side-by-side configuration or the French door style, these refrigerators are engineered to enhance daily life while keeping your food fresh and accessible.