Cybex 710T Treadmill Owner’s Manual

12.Attach the drive belt tensioning assembly.

A.Place the drive belt tensioning roller in position under the front bracket on the drive belt tensioning assembly. See Figure 3.

B.Place the two steel bar springs over the drive belt tensioning roller plate and under the front bracket on the drive belt tensioning assembly. Be sure springs are firmly seated against the stop under the drive belt retainer.

C.Be sure that the pulley is aligned with the drive belt.

D.Using a 1/2” wrench, tighten the mounting bolt and two washers while keeping the pulley aligned with the drive belt. NOTE: A drive belt that is too loose may squeal and you may be able to see it slip when you walk on the running belt.

13.Attach the running deck.

A.Using an Allen wrench, attach the remaining screw, spacer, and belt retaining washer in the frontmost right hole.

B.Using a 7/16” wrench, attach the nine screws, nine washers and nine belt retaining washers that hold the deck in place. See Figure 3.

Rear Roller

14.Replace the rear roller.

A.Slide the rear roller into the running belt.

B.Place the bolts, washers, springs, and nuts in position. Partially tighten the two bolts leaving them loose until step 15C.

15.Reinstall the side rails and end caps.

A.Line up the side rails with the end of the frame. Place the bottom edge of each side rail under the treadmill frame and push the top edge of each side rail in place. It will snap on.

B.Place the end cap flush with the end of the side rail and the end of the frame. Use a 3/16” Allen wrench to attach the two button head screws that fasten each end cap and side rail to the frame.

C.Using a 3/4” wrench, tighten each rear roller bolt evenly, making sure not to loosen either bolt too many turns before moving to the other bolt. use the small plastic tab above the bolt hole as a visual reference to tension the rear roller bolts. When tightening the rear roller bolts, look down onto the plastic tab located just above the bolt head. Make sure the entire side of the silver washer is visible and is not hidden by any portion of the tab.

16.Adjust the running belt tension and center the belt by following the instructions

Page 7-10

Page 73
Image 73
Cybex International 710T, LT-14464-4 Rev H Rear Roller, Attach the drive belt tensioning assembly, Attach the running deck

LT-14464-4 Rev H, 710T specifications

The Cybex International 710T, LT-14464-4 Rev H is a top-tier piece of fitness equipment designed for commercial gym settings and serious home workout enthusiasts. This high-performance treadmill stands out due to its innovative features, robust design, and technology that prioritizes user comfort and efficiency.

One of the central features of the 710T is its advanced mechanics, which include a powerful DC motor that provides a smooth and consistent performance across various speeds. With a top speed of 12 miles per hour and an incline of up to 15%, users can engage in a diverse range of workouts that simulate outdoor running and walking environments. This versatility makes the 710T suitable for users of different fitness levels, from beginners to seasoned athletes.

The treadmill also boasts a spacious running surface of 22 inches by 60 inches, allowing for comfortable strides and reduced risk of injury. The patented FlexTech® system is engineered to absorb impact, providing a cushioned deck that minimizes stress on joints while still allowing for an effective workout. This technology promotes longer exercise sessions, which can contribute to better overall fitness goals.

Another remarkable feature is the intuitive console equipped with a large, easy-to-read display that offers users essential metrics, including time, distance, calories burned, and heart rate. The console is designed for simplicity and ease of use, with quick-access buttons for speed and incline adjustments, enabling users to customize their workouts effortlessly.

Connectivity is a significant aspect of modern workout experiences, and the 710T does not disappoint. It includes built-in Bluetooth compatibility, allowing users to sync their devices with fitness apps for tracking and sharing workout progress. Additionally, the integrated USB charging port ensures devices remain powered during exercise, allowing for uninterrupted music or entertainment.

Safety is a top priority, and the Cybex 710T is equipped with emergency stop features and adjustable handrails for added stability. The durable construction of the treadmill makes it suitable for heavy daily use, ensuring longevity and reliability.

In summary, the Cybex International 710T, LT-14464-4 Rev H is a comprehensive treadmill engineered with innovative technology, robust design, and user-friendly features that cater to various fitness needs. Its combination of performance, safety, and connectivity epitomizes the philosophy of Cybex in promoting an efficient and enjoyable workout experience.