Cybex 710T Treadmill Owner’s Manual

Test the 710T Operation

Use the following instructions to test the full speed and incline range of the treadmill and to check the belt for proper operation.

! CAUTION During this procedure STAY OFF THE RUNNING BELT! Stand with your feet on the side platforms.

1.Without anyone on the treadmill, plug the power cord into the front end of the treadmill and into a power outlet from a grounded, dedicated circuit, and 115 VAC, 60 Hz and 20 amps, or 230 VAC, 50 Hz, and 15 amps, or 208/220 VAC, 60 Hz and 15 amps.

2.Locate the on/off (I/O) power switch on the front of the treadmill. Toggle it to the on position (I).

3.The control panel will light up and continuously display information on available programs when the treadmill is in Dormant Mode with the on/off power switch turned on (I) and the treadmill power cord plugged in. (Cybex recommends that the treadmill be unplugged or the On/Off (I/O) power switch turned Off (O) when it is not in use.)

NOTE: Cybex recommends that the treadmill be unplugged or the on/off (I/O) power switch turned off (O) when it is not in use.

4.Press the START/ENTER key three times, first to enter the Selection Mode menu, second to accept the default of Manual Mode and third to accept the default weight.

5.The treadmill begins a countdown in the display window, “3...2...1,” and sounds a tone for each count. After it reaches one (1), the treadmill gives a steady tone, and then starts accelerating the belt to reach 1 mph (1.6 kph).

6.Without standing on the running belt, press and hold down the SPEED + key until the treadmill reaches a speed of approximately 4 mph (6.4 kph), as indicated on the display.

7.Observe the belt to see that it is running properly; it should stay centered in the middle of the deck. If you have problems with the running belt operation, see Running Belt Adjustments in the Preventive Maintenance chapter.

8.Press and hold the SPEED + key until the treadmill reaches its highest speed, 10 mph (16.1 kph). Then press the SPEED - key until the treadmill is back to 1.0 mph (1.6 kph).

5 Setup & Assembly

Quick Setup . . . . . . . . . . . . 5-1

Choosing & Preparing a Site 5-1

Electrical Power

Requirements. . . . . . . . . . 5-3

Unpacking . . . . . . . . . . . . . . 5-3

Assembling the Treadmill. . . 5-4

Testing the 710T Operation . 5-9

Setting Operation Options. 5-10

Page 5-9

Page 54
Image 54
Cybex International LT-14464-4 Rev H manual Test the 710T Operation

LT-14464-4 Rev H, 710T specifications

The Cybex International 710T, LT-14464-4 Rev H is a top-tier piece of fitness equipment designed for commercial gym settings and serious home workout enthusiasts. This high-performance treadmill stands out due to its innovative features, robust design, and technology that prioritizes user comfort and efficiency.

One of the central features of the 710T is its advanced mechanics, which include a powerful DC motor that provides a smooth and consistent performance across various speeds. With a top speed of 12 miles per hour and an incline of up to 15%, users can engage in a diverse range of workouts that simulate outdoor running and walking environments. This versatility makes the 710T suitable for users of different fitness levels, from beginners to seasoned athletes.

The treadmill also boasts a spacious running surface of 22 inches by 60 inches, allowing for comfortable strides and reduced risk of injury. The patented FlexTech® system is engineered to absorb impact, providing a cushioned deck that minimizes stress on joints while still allowing for an effective workout. This technology promotes longer exercise sessions, which can contribute to better overall fitness goals.

Another remarkable feature is the intuitive console equipped with a large, easy-to-read display that offers users essential metrics, including time, distance, calories burned, and heart rate. The console is designed for simplicity and ease of use, with quick-access buttons for speed and incline adjustments, enabling users to customize their workouts effortlessly.

Connectivity is a significant aspect of modern workout experiences, and the 710T does not disappoint. It includes built-in Bluetooth compatibility, allowing users to sync their devices with fitness apps for tracking and sharing workout progress. Additionally, the integrated USB charging port ensures devices remain powered during exercise, allowing for uninterrupted music or entertainment.

Safety is a top priority, and the Cybex 710T is equipped with emergency stop features and adjustable handrails for added stability. The durable construction of the treadmill makes it suitable for heavy daily use, ensuring longevity and reliability.

In summary, the Cybex International 710T, LT-14464-4 Rev H is a comprehensive treadmill engineered with innovative technology, robust design, and user-friendly features that cater to various fitness needs. Its combination of performance, safety, and connectivity epitomizes the philosophy of Cybex in promoting an efficient and enjoyable workout experience.