HELPFUL HINTS | BEVERAGE COOLER EXTRA FEATURES |
|
|
PARTS OF A CO2 REGULATOR
(A)Low Pressure Gauge
(B)Regulator Adjustment Screw
(C)Adjustment Lock Nut
(D)
(E)CO2 Nut (used to connect to CO2 Canister)
(F)High Pressure Gauge
BEER STORAGETEMPERATURE
•Draft beer is not pasteurized, so it must be kept cold, preferably at 38ºF. Temperatures above 38ºF may cause the beer to become wild, turn sour and cloudy.
RECOMMENDED KEG HANDLING
•Be sure the keg is cold when you purchase it.
•Transfer keg from place of purchase and install in beverage center in 2 hours or less.
•After the keg is installed in the beverage center, allow 24 hours for beverage to reach recommended temperature.
•If the keg is exposed to ambient temperatures longer than 2 hours, additional cooling time will be required before beverage will reach recommended temperature.
TYPICAL BEER SERVING EQUIVALENTS
| ¼ Keg | ½ Keg | |
Ounces | 992 | 1984 | |
Gallons | 7 ¾ | 15 ½ | |
Cases | 3 3/8 | 6 ¾ | |
(12 oz. bottles) | |||
|
| ||
Weight (full) | 82.5 lbs. | 165 lbs. | |
(approx.) | (approx.) | ||
|
OPTIONAL CASTER KIT
If you’d like to make your beverage center so it can be rolled from room to room, there is an optional caster kit available from your authorized Frigidaire dealer or service center. Just ask for part number 5304451343 - Caster, Rail and Hardware Kit, which includes 2 fixed casters, 2 swivel casters, 2 caster support rails and mounting hardware.
CAUTION
DO NOT ATTEMPT TO MOVE OR RELOCATE THIS BEVERAGE CENTER WITH A KEG INSIDE.
ADJUSTABLE INTERIOR SHELVES
Adjustable interior shelve (P/N 241667701) can be used when ¼ keg is installed.
13