Frigidaire RH30WC60GS, EI36WC60GS, 316488522 Install framing for hood support, Mounting the hood

Page 10

10

Installing the hood

 

Install framing for hood support

•If drywall is present, mark the screw hole locations. Remove the template.

•Cut away enough drywall to expose 2 vertical studs at the holes location indicated by the template.

Install two horizontal supports at least 4" X 2" between two wall studs at the bottom and upper mounting holes installation location.

•The horizontal support must be flush with the room side of the studs.

Use cleats behind both sides of the support to secure to wall studs.

•Reinstall drywall and refinish.

IMPORTANT- Framing must be capable of supporting 100 lbs.

8-1/2"min. opening for ductwork

View From Rear

Cleats

1"x6" Min. Mounting Support

Centerline of

Installation

Space

Mounting the hood

WARNING: 2 people are required to lift and position the hood onto the mounting screws.

•Place the template on the wall along the horizon- tal line, make sure the template is leveled and centered with the centerline.

•Mark “upper” screw holes locations in the wall.

•IMPORTANT. Check to be sure that hole locations are leveled and correctly centered by the vertical centerline.

•Drive “upper” wood screws by hand. Leave ¼ “ of distance between the screw head and the wall.

•Remove the grease filter and mount the hood onto the “upper” screws.

•Mark “lower” wood screw holes locations in the wall using a pencil.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation, Use & Care Guide Keep a record for quick reference Table of contentsPlease read and save this guide Questions?Important Safety Instructions Read and Save These Instructions Electrical & Installation requirements Electrical requirementsParts Included with your Hood Optional accessoriesList of Materials Tools/Materials requiredWall framing for adequate support Installing the hoodInstalling preparation Removing the packagingDuctwork and wiring locations Ductwork installation guidelinesExamples of possible ducting Ceiling ducting House wiring locationMounting the duct cover bracket Wall ductingMounting the hood Install framing for hood supportIMPORTANT- Framing must be capable of supporting 100 lbs Installing the hood Connecting the ductwork Air deflector installation Recirculating accessories120 VAC, 15 or 20 Amp circuit required Making the electrical connectionsMounting the glass canopy Failure to do so can result in death or electrical shockMounting the duct cover Features Control buttons Special functions For Best results Lights Care and cleaningFilters Optional Charcoal Filters Charcoal filter placement Recirculating accessoriesCleaning Hood SurfaceRESPONSIBILITIESresponsible for the items listed below Exclusions This warranty does not cover the followingElectrolux Home Products North America

EI36WC60GS, EI30WC60GS, RH30WC60GS, 316488522, RH36WC60GS specifications

Frigidaire has long been recognized for its commitment to quality, innovation, and reliability in kitchen appliances. Among its wide range of products, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS stand out as pinnacle offerings in the realm of wall-mounted range hoods. Each of these models delivers a blend of advanced features and technologies designed to enhance both functionality and aesthetics in the kitchen.

The RH36WC60GS model is a 36-inch professional-style wall hood that showcases Frigidaire’s trademark focus on performance and design. It comes with powerful ventilation capabilities, featuring a 600 CFM motor to effectively eliminate smoke, steam, and odors from cooking. This model operates at multiple speeds, allowing users to select just the right level of airflow for their cooking needs. Its sleek stainless-steel finish is not only visually appealing but also easy to clean, making it an ideal choice for modern kitchens.

Similarly, the RH30WC60GS is a 30-inch model that adopts the same high standard of engineering. It mirrors the robust performance characteristics of the larger RH36WC60GS but is designed to fit smaller spaces without compromising on efficiency. The unit is equipped with a dishwasher-safe grease filter, enhancing maintenance ease and ensuring long-lasting performance.

The EI30WC60GS and EI36WC60GS are additional offerings that further exemplify Frigidaire's innovative spirit. These models come with sophisticated technologies such as an advanced LED lighting system, which illuminates the cooking area while being energy-efficient. Both models also include a quiet mode feature to minimize noise pollution without sacrificing ventilation power, a key selling point for busy households.

All four hoods provide compatibility with Frigidaire’s proprietary air quality monitoring systems, allowing users to maintain an optimal cooking environment. Their sleek, contemporary designs seamlessly integrate with a variety of kitchen styles, ranging from traditional to ultra-modern.

In summary, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS range hoods combine powerful ventilation, ease of maintenance, and modern aesthetics. These characteristics make them indispensable tools for any culinary enthusiast, ensuring clean air and a pleasant cooking experience. Whether in spacious gourmet kitchens or compact cooking spaces, these hoods stand ready to enhance the cooking environment.
Top Page Image Contents