Frigidaire EI30WC60GS, RH30WC60GS Mounting the duct cover bracket, Ceiling ducting, Wall ducting

Page 9

Installing the hood

9

 

Mounting the duct cover bracket

The duct bracket should be installed against the back wall and flush with the ceiling. This bracket will hold the telescopic duct cover in place at the top (this a extra accessory available not included with the hood).

.

Secure the bracket to the wall:

•Align the marked centerline on the bracket with the centerline on the wall.

•Mark 2 screw hole locations in the wall.

•Drill 5/16" pilot holes in the marked locations.

•Install wall fastener anchors.

•Drive wood screws, by hand, into the fastener to allow anchors to expand. Remove the screws.

•Secure the bracket to the wall with wood screws and/or fasteners.

Ceiling ducting

If the duct will vent straight up to the ceiling:

•Use level to draw a line straight up, from the centerline on the template to the ceiling.

•Measure at least 4 -12/16 ” from the back wall to the circle center of an 8-½” hole on the ceiling.

Wall ducting

If ductwork will vent to rear:

•Use a level to draw a line straight up from the centerline on the template.

•Measure at least 23 - 12/16" (the measure might vary depending on the elbow used) above the pencil line that indicates the bottom installation height, to the circle center of an 8-½” diameter duct hole (Hole may be elongated for duct elbow).

House wiring location

•The junction box is located on the top left side of the hood.

•Wiring should enter the back wall at least 20" above the bottom of the installation height, and within 5-7/8" and 4-7/8"of the left side of the centerline.

Wall

Vertical centerline

4-3/4" circle center to wall

8-1/2" dia. hole

FOR

WALL

VENT

DUCT

FOR CEILING VENT DUCTING

Ceiling

Circle center at 23 3/4" above the marked bottom

pencil line.

Horizontal straight pencil line

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Installation, Use & Care Guide Please read and save this guide Table of contentsKeep a record for quick reference Questions?Important Safety Instructions Read and Save These Instructions Electrical requirements Electrical & Installation requirementsList of Materials Optional accessoriesParts Included with your Hood Tools/Materials requiredInstalling preparation Installing the hoodWall framing for adequate support Removing the packagingDuctwork installation guidelines Ductwork and wiring locationsExamples of possible ducting Mounting the duct cover bracket House wiring locationCeiling ducting Wall ductingInstall framing for hood support Mounting the hoodIMPORTANT- Framing must be capable of supporting 100 lbs Installing the hood Air deflector installation Recirculating accessories Connecting the ductworkMounting the glass canopy Making the electrical connections120 VAC, 15 or 20 Amp circuit required Failure to do so can result in death or electrical shockMounting the duct cover Features Control buttons Special functions For Best results Care and cleaning LightsFilters Cleaning Charcoal filter placement Recirculating accessoriesOptional Charcoal Filters Hood SurfaceExclusions This warranty does not cover the following RESPONSIBILITIESresponsible for the items listed belowElectrolux Home Products North America

EI36WC60GS, EI30WC60GS, RH30WC60GS, 316488522, RH36WC60GS specifications

Frigidaire has long been recognized for its commitment to quality, innovation, and reliability in kitchen appliances. Among its wide range of products, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS stand out as pinnacle offerings in the realm of wall-mounted range hoods. Each of these models delivers a blend of advanced features and technologies designed to enhance both functionality and aesthetics in the kitchen.

The RH36WC60GS model is a 36-inch professional-style wall hood that showcases Frigidaire’s trademark focus on performance and design. It comes with powerful ventilation capabilities, featuring a 600 CFM motor to effectively eliminate smoke, steam, and odors from cooking. This model operates at multiple speeds, allowing users to select just the right level of airflow for their cooking needs. Its sleek stainless-steel finish is not only visually appealing but also easy to clean, making it an ideal choice for modern kitchens.

Similarly, the RH30WC60GS is a 30-inch model that adopts the same high standard of engineering. It mirrors the robust performance characteristics of the larger RH36WC60GS but is designed to fit smaller spaces without compromising on efficiency. The unit is equipped with a dishwasher-safe grease filter, enhancing maintenance ease and ensuring long-lasting performance.

The EI30WC60GS and EI36WC60GS are additional offerings that further exemplify Frigidaire's innovative spirit. These models come with sophisticated technologies such as an advanced LED lighting system, which illuminates the cooking area while being energy-efficient. Both models also include a quiet mode feature to minimize noise pollution without sacrificing ventilation power, a key selling point for busy households.

All four hoods provide compatibility with Frigidaire’s proprietary air quality monitoring systems, allowing users to maintain an optimal cooking environment. Their sleek, contemporary designs seamlessly integrate with a variety of kitchen styles, ranging from traditional to ultra-modern.

In summary, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS range hoods combine powerful ventilation, ease of maintenance, and modern aesthetics. These characteristics make them indispensable tools for any culinary enthusiast, ensuring clean air and a pleasant cooking experience. Whether in spacious gourmet kitchens or compact cooking spaces, these hoods stand ready to enhance the cooking environment.
Top Page Image Contents