Frigidaire RH36WC60GS, RH30WC60GS Making the electrical connections, Mounting the glass canopy

Page 13

Installing the hood

13

 

Making the electrical connections

Electrical Shock Hazard

Warning: Turn off power at the service panel before wiring this unit.

120 VAC, 15 or 20 Amp circuit required.

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH 3 WIRES, ONE OF WHICH (GREEN/YELLOW) SERVES TO GROUND THE APPLIANCE. TO PROTECT YOU AGAINST ELECTRIC SHOCK, THE GREEN AND YELLOW WIRE MUST BE CONNECTED TO THE GROUNDING WIRE IN YOUR

HOME ELECTRICAL SYSTEM, AND IT MUST UNDER NO CIRCUMSTANCES BE CUT OR REMO- VED.

Failure to do so can result in death or electrical shock.

•Remove junction box cover and knockout on the top left side.

Knockout

Junction box cover

Metal electrical conduit

House wiring

U.L. listed wire nut

•Run black (live), white (neutral), and green (earth) wires (#14 AWG) according to the National Electrical Code or CSA Standards and local codes and ordinances in 1/2” conduit from power supply to j-box.

•Connect black, white, and green wires from power supply to black, white, and green/yellow wires in j-box respectively.

•These connections should be done always making reference to the electrical diagram found inside the hood.

•Close j-box cover and reapply screws.

Mounting the glass canopy

•With the hood mounted on the wall slide the glass canopy over the glass supports.

•Insert the glass brackets.

•Insert two screws into the bracket holes, drive the screws by hand.

•If not already done, install 1/2” conduit connector in j-box.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation, Use & Care Guide Please read and save this guide Table of contentsKeep a record for quick reference Questions?Important Safety Instructions Read and Save These Instructions Electrical requirements Electrical & Installation requirementsList of Materials Optional accessoriesParts Included with your Hood Tools/Materials requiredInstalling preparation Installing the hoodWall framing for adequate support Removing the packagingDuctwork and wiring locations Ductwork installation guidelinesExamples of possible ducting Mounting the duct cover bracket House wiring locationCeiling ducting Wall ductingMounting the hood Install framing for hood supportIMPORTANT- Framing must be capable of supporting 100 lbs Installing the hood Air deflector installation Recirculating accessories Connecting the ductworkMounting the glass canopy Making the electrical connections120 VAC, 15 or 20 Amp circuit required Failure to do so can result in death or electrical shockMounting the duct cover Features Control buttons Special functions For Best results Lights Care and cleaningFilters Cleaning Charcoal filter placement Recirculating accessoriesOptional Charcoal Filters Hood SurfaceRESPONSIBILITIESresponsible for the items listed below Exclusions This warranty does not cover the followingElectrolux Home Products North America

EI36WC60GS, EI30WC60GS, RH30WC60GS, 316488522, RH36WC60GS specifications

Frigidaire has long been recognized for its commitment to quality, innovation, and reliability in kitchen appliances. Among its wide range of products, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS stand out as pinnacle offerings in the realm of wall-mounted range hoods. Each of these models delivers a blend of advanced features and technologies designed to enhance both functionality and aesthetics in the kitchen.

The RH36WC60GS model is a 36-inch professional-style wall hood that showcases Frigidaire’s trademark focus on performance and design. It comes with powerful ventilation capabilities, featuring a 600 CFM motor to effectively eliminate smoke, steam, and odors from cooking. This model operates at multiple speeds, allowing users to select just the right level of airflow for their cooking needs. Its sleek stainless-steel finish is not only visually appealing but also easy to clean, making it an ideal choice for modern kitchens.

Similarly, the RH30WC60GS is a 30-inch model that adopts the same high standard of engineering. It mirrors the robust performance characteristics of the larger RH36WC60GS but is designed to fit smaller spaces without compromising on efficiency. The unit is equipped with a dishwasher-safe grease filter, enhancing maintenance ease and ensuring long-lasting performance.

The EI30WC60GS and EI36WC60GS are additional offerings that further exemplify Frigidaire's innovative spirit. These models come with sophisticated technologies such as an advanced LED lighting system, which illuminates the cooking area while being energy-efficient. Both models also include a quiet mode feature to minimize noise pollution without sacrificing ventilation power, a key selling point for busy households.

All four hoods provide compatibility with Frigidaire’s proprietary air quality monitoring systems, allowing users to maintain an optimal cooking environment. Their sleek, contemporary designs seamlessly integrate with a variety of kitchen styles, ranging from traditional to ultra-modern.

In summary, the Frigidaire RH36WC60GS, RH30WC60GS, EI30WC60GS, and EI36WC60GS range hoods combine powerful ventilation, ease of maintenance, and modern aesthetics. These characteristics make them indispensable tools for any culinary enthusiast, ensuring clean air and a pleasant cooking experience. Whether in spacious gourmet kitchens or compact cooking spaces, these hoods stand ready to enhance the cooking environment.
Top Page Image Contents