Frigidaire FFEW2425LS, 318205317 Setting Oven controls Model B, Oven can be programmed to

Page 10

Setting OVEN controls - Model B

Control pad features

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide.

NOTE

The oven function will not work if the time of day clock is not set.

 

 

 

 

 

8

1

2

 

6

7

9

3

4

5

10

11

12

 

 

 

 

 

1.Clock pad—Use to set the time of day.

2.Bake time pad—Use to enter the length of the baking time.

3.Timer on-offpad—Use to set or cancel the Timer. The Timer does not start or stop cooking.

4.Start time pad—Used to set the desired start time for baking. Can be used with BAKE TIME to program a delayed bake cycle.

5.Oven, preheat & door locked lights— The “oven” light will glow each time the oven unit turns on maintain the set oven temperature. The “Preheat” light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The “Door Locked” light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks.

The oven can be programmed to

Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean Note: Push buttons or pads may be shaped differently.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold START TIME pad. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold START TIME pad again for 7 seconds until 1 beep is heard.

6.Up arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

7.Bake pad—Use to select the bake cooking feature.

8.Feature indicator lights—These light to show which feature is in use.

9.Broil pad—Use to select the broil cooking feature.

10.Down arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

11.Clear off pad—Use to cancel any oven feature previously entered except the time of day and minute timer.

12.Clean Pad—Used to select the self-cleaning cycle.

Temperature Conversion (Fahrenheit/Celsius) The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Push BROIL pad. "- - - " appears in the display.

2.Push and hold the UP ARROW pad until "HI" appears in the display.

3.Push and hold BROIL pad until °F or °C appears in the display.

4.Push UP or DOWN ARROW pad to change °F to °C or °C to °F.

5.To accept the change, wait 6 seconds.

10

Image 10 Contents
Use &Care Product Welcome & CongratulationsRegister Your Product Please Carefully read and save these instructionsDefinitions Important Safety InstructionsDo not Touch Interior Oven Elements or Important Safety Notice Features AT a Glance model a Your Electric Wall-Oven FeaturesFeatures AT a Glance Model B Air Circulation in the Oven Oven Vent LocationArranging Oven Racks Recommended Rack PositionTo Set the Minute Timer Setting Oven controls Model aTo Change the Temperature Display Mode Press Timer ON/OFF padTo Broil To Set or Change the Temperature for BakingAdjusting Your Oven Temperature Failure ModesOven can be programmed to Setting Oven controls Model BFor a silent control panel To Set Control for Continuous Bake or 12 Hour Energy Saving Push Timer ON/OFF padTo Set Control for Oven Lockout feature To Set Control for Oven LockoutTo Set the Controls for Normal Baking To Set or Change the Temperature for Normal BakingSetting Broil Broiling TipsWhen the Set Bake Time Runs Out To Set the Bake time FeatureRecalibrating Your Oven Temperature Once the Controls are SetAdhere to the following cleaning precautions Self-cleaningWhat to Expect during Cleaning To Set the Controls for a Self-Clean Cycle To Start the Self-Clean CycleWhen the Self-Clean Cycle is Completed Care & Cleaning Cleaning Various Parts of Your RangeRemoving and replacing the lift-off oven door Care & CleaningCare and cleaning of stainless steel Changing oven lightBaking Problems and Solutions Chart Oven BakingOccurrence Possible CAUSE/SOLUTION Disclaimer of Implies Warranties Limitation of Remedies Exclusions This warranty does not cover the followingService If You