Frigidaire 318205303 Setting the Clock, Changing between 12 or 24 hour time of day display

Page 10

Setting OVEN controls

Setting the Clock

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

Changing between 12 or 24 hour time of day display

1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

Setting Continuous Bake or 6 Hour Energy Saving

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour

Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

Setting Temperature Display — Fahrenheit or Celsius:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use &Care Register Your Product Welcome & CongratulationsPlease Carefully read and save these instructions Important Safety Instructions DefinitionsImportant Safety Instructions for Using Your Oven Do not Touch Interior Oven Elements orImportant Safety Instructions for Cleaning Your Oven Features AT a GlanceYour Electric Wall Oven Features At a Glance Air Circulation in the Oven Before Setting Oven ControlsOven Vent Location Arranging Oven RacksFlat Handle Oven Rack Figure Types of Oven RacksOffset Oven Rack Control Pad Features Before Setting Oven controlsFunction follow later in this Use & Care Guide Temperature Visual Display Setting Oven controlsMinimum and Maximum Control Pad Settings Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Temperature Display Fahrenheit or Celsius Setting the ClockSetting Continuous Bake or 6 Hour Energy Saving Changing between 12 or 24 hour time of day displaySetting Minute Timer Setting Oven Lockout FeatureSetting Silent Control Operation Setting Add 1 Minute Feature some modelsTo set the Preheat temperature for 375F Setting Quick Preheat or PreheatSetting Bake To set the Bake Temperature to 375FConvection Baking Tips Setting Oven ControlsSetting Convection Bake Air circulation during Convection BakeTo set a Convection Roast Temperature of 375F Setting Convection ConvertSetting Convection Roast Convection Roasting TipsConvection Broiling Tips Setting Convection Broil some modelsTo set a Convection Broil Temperature of 500F Electric Oven Convection Broiling Table RecommendationsWhen the timed bake finishes Setting Bake TimeSetting Delay Start BAKE, Convect BAKE, Bake Time and DelayBroiling Tips Setting BroilCancel Electric Oven Broiling Table RecommendationsSetting Chicken Nuggets Setting Pizza some modelsSetting Keep Warm Delayed Bake TimeSetting Oven Controls To adjust the oven temperature lower Adjusting Oven TemperatureTo adjust the oven temperature higher Oven lightAdhere to the following cleaning precautions SELF-CLEANINGSELF-CLEANING What to Expect during CleaningWhen the Self-Clean Cycle is Completed Setting SELF-CLEAN Cycle Time LengthStopping or Interrupting a Self-Cleaning Cycle Cleaning Various Parts of Your Range Care & CleaningTo Remove the Hidden Bake Cover some models Changing Oven Light Care & CleaningRemoving and Replacing the Lift Off Oven Door Be Sure Oven is CoolBaking Problems and Solutions Chart Oven BakingOccurrence Possible CAUSE/SOLUTION Exclusions This warranty does not cover the following Major Appliance WarrantyDisclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents