SETTING SELF-CLEAN CYCLE TIME LENGTH
The SELF CLEAN pad controls the
*It is recommend to use a 2 hour
To set the controls for a 3 hour
to start immediately and shut off automatically
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2.Press SELF CLEAN. “DOOR” will flash. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period (default
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.
3.Press START. The “DOOR” icon will flash; “CLEAN” and the letters “CLn” will remain on in the display.
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will
stop flashing and remain on and the icon will appear. Also, the oven icon will appear in the display.
NOTE
Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.
2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a
1.Press CANCEL.
2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and icons are no longer displayed.
SELF-CLEANING
The SELF CLEAN and DELAY START pads controls the Delayed
To set the control for the
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2.Press SELF CLEAN. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period. For the first 10 seconds, “Remove Racks” will flash and beep to remind you that the racks need to be removed.
NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.
3.Press START. The “DOOR” icon will flash; “CLEAN”, and the letters “CLn” will remain on in the display.
4.Press DELAY START. Enter the desired start time using the number pads 4 3 0.
5.Press START. “DELAY”, “DOOR LOCKED” and “CLEAN” icons will remain on.
6.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will quit
flashing and remain on and the icon will appear.
7.The control will start the
When the
1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.
2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.
Stopping or Interrupting a
If it becomes necessary to stop or interrupt a
1.Press CANCEL.
2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and icons are no longer displayed.
23