Frigidaire 318205302 manual Setting the Clock, Changing between 12 or 24 hour time of day display

Page 10

Setting OVEN controls

Setting the Clock

The CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

Changing between 12 or 24 hour time of day display

1.Press and hold CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

Setting Temperature Display — Fahrenheit or Celsius:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

Setting Continuous Bake or 6 Hour Energy Saving

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

Setting Silent Control Operation

The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press and hold DELAY START. “----” will appear and “DELAY” will flash in the display. After 6 seconds “bEEP On” or “bEEP OFF” will appear in the display.

2.Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either “bEEP On” or “bEEP OFF”.

Note: If “bEEP On” appears, the control will operate with normal sounds and beeps. If “bEEP OFF” appears, the control is in the silent operation mode.

3.Press START to accept the change or press CANCEL to reject the change.

Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use &Care Please Carefully read and save these instructions Welcome & CongratulationsRegister Your Product Please attach sales receipt here for future referenceDefinitions Important Safety InstructionsDo not Touch Interior Oven Elements Important Safety Instructions for Using Your Oven Important Safety Instructions for Cleaning Your OvenFeatures AT a Glance Your electric wall oven featuresAir Circulation in the Oven Before Setting Oven ControlsOven Vent Location Arranging Oven RacksTypes of Oven Racks Offset Oven RackConvect Convert PAD-Use to convert Before Setting Oven controlsControl Pad Features Warm PAD-Use to keep the dishes and food warm until servedMinimum and Maximum Control Pad Settings Setting Oven controlsTemperature Visual Display Feature Minimum TEMP. /TIME Maximum TEMP. /TIMESetting Continuous Bake or 6 Hour Energy Saving Setting the ClockSetting Temperature Display Fahrenheit or Celsius Setting Silent Control OperationSetting +1 Min Feature Setting Minute TimerSetting Oven Lockout Feature Setting Bake Setting Quick or power PreheatStart Convection Baking Tips Setting Oven ControlsSetting Convection Bake Air circulation during Convection BakeTo set a Convection Roast Temperature of 375F Setting Convection CONVERsionSetting Convection Roast Convection Roasting TipsConvection Broiling Tips Setting Convection BroilTo set a Convection Broil Temperature of 500F Electric Oven Convection Broiling Table RecommendationsWhen the timed bake finishes Setting Bake TimeSetting Delay Start BAKE, Convection BAKE, Bake Time and DelayBroiling Tips Setting BroilCancel Electric Oven Broiling Table RecommendationsSetting Nuggets Setting PizzaSetting Warm Setting Favorite Models B & C onlySetting Oven Controls To adjust the oven temperature lower Adjusting Oven TemperatureTo adjust the oven temperature higher Oven lightAdhere to the following cleaning precautions SELF-CLEANINGWhat to Expect during Cleaning When the Self-Clean Cycle is Completed Setting a SELF-CLEAN CycleSetting a Delayed Start SELF-CLEAN Cycle Stopping or Interrupting a Self-Cleaning CycleCare & Cleaning Cleaning Various Parts of Your RangeChanging Oven Light Care & CleaningRemoving and Replacing the Lift Off Oven Door Be Sure Oven is CoolBaking Problems and Solutions Chart Oven BakingOccurrence Possible CAUSE/SOLUTION Exclusions This warranty does not cover the following Major Appliance WarrantyDisclaimer of Implies Warranties Limitation of Remedies
Top Page Image Contents