Frigidaire Outdoor Grill with Electronic Ignition warranty Side Burner Assembly

Side Burner Assembly

SIDE BURNER PARTS ASSEMBLY

1.Attach the side burner shelf to the grill by inserting the shelf hooks into the slots on the side of the grill and pushing down on the shelf assembly until level with the grill. (See Fig. 8)

2.Lock the side burner shelf in place by inserting (2) hex head screws in the side burner. (See Fig. 9)

NOTE: A power screwdriver extension is needed to insert screws.

3.Install burner and cap. (See Fig. 10-11)

4.Install grate over burner. (See Fig. 12)

5.Attach the three (3) wires coming out from the side of the grill and the side burner wire to the igniter terminals. (See Fig. 13-14)

NOTE: It does not matter which wire goes to which terminal on the igniter.

Back of side burner.

Fig. 13

Side Shelf Tabs

Screw Holes

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 14

Fig. 12

6