Frigidaire FEC32S6AS, 318201426 (0810) dimensions S.A. Only, Wire Grounded Junction BOX

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS

This appliance is equipped with a copper conductor flexible cable. If connection is made to aluminum house wiring, use only special connectors which are approved for joining copper and aluminum wires in accordance with the National Electrical Code and local codes and ordinances.

This appliance is manufactured with a frame connected green (or bare copper) ground wire.

1.If connecting to a 3-wire supply cable (U.S.A. only): If local codes permit connection of the frame grounding conductor to the neutral (white) wire: (The 3-conductor cord or cable must be replaced with a 4-conductor cord or cable where grounding through the neutral conductor is prohibited in new installations, mobile homes, recreational vehicles or in other areas where local codes do not permit neutral grounding)

Connect the green (or bare copper) wire (and the white wire for model with warmer zone) from the appliance cable to the supply cable ground wire (white or bare) inside the junction box. Connect the remaining wires inside the junction box (see Figure 4 or 5) from the power supply cable to the matching colors of the appliance cable wires.

	Cable	from	Power	Supply
	Ground Wire
	R e d			Black
	Wires
				Wires
				Junction	Box
Ground	Wire			U.L.-Listed	Conduit
(Bare or Green Wire)
	Cable from appliance Connector (or CSA listed)
	Figure 4 – U.S.A. Only
	3-WIRE GROUNDED JUNCTION BOX
	Cable	from	Power	Supply
	Ground Wire			Black
				Wires
	R e d
	Wires
				Junction		Box
				White Wire
Ground	Wire			U.L.-Listed	Conduit
(Bare or Green Wire)
				Connector	(or	CSA listed)

Cable from appliance

Figure 5 – U.S.A. Only

Models 36" with Warmer Zone Only

3-WIRE GROUNDED JUNCTION BOX

WARNING Improper connection of aluminum house wiring to copper leads can result in a short circuit or fire. Use only connectors designed for joining copper to aluminum, and follow the manufacturer's recommended procedure closely.

2.If connecting to a 4-wire supply cable (also mobile homes): The appliance frame must not be connected to the neutral wire of the 4-wire electrical system. Connect the appliance white wire (if a 4-wire appliance cable is supplied) to the power supply cable white wire. Cap the white wire from the power supply cable if a 3-wire appliance cable is supplied. Connect the remaining wires from the supply cable to the matching color wires from the appliance cable (see Figure 6 or 7). The green (or bare copper) wire must now be used to ground the appliance in accordance with local electrical codes. The green (or bare copper) wire from the power supply cable is grounded inside the house service panel.

Cable	from	Power	Supply
Ground Wire			White Wire
R e d			Black
Wires
			Wires
			Junction	Box
Ground Wire			U.L.-Listed	Conduit
(Bare or Green Wire)
			Connector	(or CSA	listed)
Cable from appliance
Figure 6 – 4-WIRE GROUNDED JUNCTION BOX
Cable	from	Power	Supply
Ground Wire			White Wire
R e d
Wires
			Black
Ground Wire			Wires
(Bare or Green Wire)
			White Wire
Junction Box			U.L.-Listed	Conduit
			Connector	(or CSA	listed)
Cable from appliance

Figure 7 – 4-WIRE GROUNDED JUNCTION BOX

Models 36" with Warmer Zone Only

WARNING DO NOT ground to a gas supply pipe. DO NOT connect to electrical power supply until appliance is permanently grounded. Connect the ground wire before turning on the power.

4