Electrolux Ceramic glass hob manual Residual-Heat indicator, Cooking zones

Page 10

Residual-Heat indicator

When you switch off a zone, an "H" in the display indicates that the zone is still hot. The residual heat indicator will continue to be illuminated as long as the temperature exceeds 80˚C.

Cooking zones

The control knobs are continuously adjustable from 1 to 9 (9 is the highest setting). There is AUTOMAX control of all settings, enabling you to set the setting required from the outset. Please see the table of settings. The 14 and 18 cm zones are suitable for boiling and preparing small and medium-sized portions. The 21 cm zone is suitable for frying, and for boiling and preparing large portions. The 12 cm zone is not suitable for boiling, but can be used for melting, simmering and the preparation of gravy, sauces etc. which must not curdle.

10

Image 10

Contents Instruction Book Your New Appliance Table of contents Safety information Description of the product Control panelCooking zones Residual heat indicatorCeramic glass surface Chec controlConnection of child safety device on zones Before useProtection of the glass ceramic surface Regulating Operating instructionsDouble cooking zone Residual-Heat indicator Automax AutostopRecommended settings when using Automax Child safety device Page Advice and hints for using the cooking zones Page Cleaning and maintenance Stainless steel surfaces Ceramic glass hobDo not stare at the heating units when in operation Fixing InstallationClearance Cut-out measurementsUnits externally measured length Single-phase zero-earth Electrical connectionTechnical data UnpackingSympton Solution Something not workingProblems Service & spare parts 08705 929Guarantee conditions France Page Page Page 325 88-1710 Rev