Electrolux Ceramic glass hob manual

Page 16

Do not slide saucepans across the surface of the hob - always lift the pan when placing it on, or removing it from the ceramic surface.

Wipe the bottom surface of the pots and pans with a clean dry cloth before placing them on the ceramic surface. This helps to reduce cleaning and prevents scratching the hob glass.

Wipe off spills whilst the hob is warm.

Select the highest setting for the cooking zones until the food is brought to the boil, then reduce the setting.

Use saucepans with an even base. An uneven based saucepan may increase the electricity consumption by up to 50%.

The saucepan should match the cooking zone or be slightly larger.

Use a tightly fitting lid on the saucepan to reduce electricity consumption.

16

Image 16
Contents Instruction Book Your New Appliance Table of contents Safety information Description of the product Control panelResidual heat indicator Ceramic glass surfaceCooking zones Chec controlConnection of child safety device on zones Before useProtection of the glass ceramic surface Regulating Operating instructionsDouble cooking zone Residual-Heat indicator Automax AutostopRecommended settings when using Automax Child safety device Page Advice and hints for using the cooking zones Page Cleaning and maintenance Stainless steel surfaces Ceramic glass hobDo not stare at the heating units when in operation Installation ClearanceFixing Cut-out measurementsUnits externally measured length Single-phase zero-earth Electrical connectionTechnical data UnpackingSympton Solution Something not workingProblems Service & spare parts 08705 929Guarantee conditions France Page Page Page 325 88-1710 Rev