Electrolux Ceramic glass hob manual Automax, Autostop

Page 11

CHEC control

Autostop

If you forget to turn a cooking zone off after use, it will be disconnected automatically after a specific period of time. The higher the setting, the shorter the time before the zone is disconnected.

Setting

AUTOSTOP

1

6 hours

2

6 hours

3

5 hours

4

5 hours

5

4 hours

6

1½hours

7

1½hours

8

1½hours

9

1½hours

When the autostop function is activated the display will show:

The zones cannot be used. Turn all the control buttons to 0.

The zones can now be used.

Automax

AUTOMAX supplies the zone with full heat for a specific period, and then adjusts down to the setting you have chosen. When you turn on a zone AUTOMAX starts automatically. The display alternates between A and the setting chosen. The period for which AUTOMAX is connected depends on the setting chosen. Please see the table of settings.

11

Image 11
Contents Instruction Book Your New Appliance Table of contents Safety information Control panel Description of the productChec control Residual heat indicatorCeramic glass surface Cooking zonesBefore use Connection of child safety device on zonesProtection of the glass ceramic surface Double cooking zone Operating instructionsRegulating Residual-Heat indicator Autostop AutomaxRecommended settings when using Automax Child safety device Page Advice and hints for using the cooking zones Page Cleaning and maintenance Ceramic glass hob Stainless steel surfacesDo not stare at the heating units when in operation Cut-out measurements InstallationClearance FixingUnits externally measured length Electrical connection Single-phase zero-earthUnpacking Technical dataSomething not working Sympton SolutionProblems 08705 929 Service & spare partsGuarantee conditions France Page Page Page 325 88-1710 Rev