Electrolux Ceramic glass hob manual Problems

Page 25

Problems

Solution

Zones will not come on, Child safety device has been activated.

S	A
F	E

Zones will not come on, Autostop has been activated.

Turn the 2 display shows control buttons with symbol for child safety device to simultaneously. Then activate one of the zones within 10 seconds.

Turn all the control display shows buttons to 0. The zones can now be used.

If after all these checks, your hob still does not operate correctly, contact your local AEG Service Force Centre.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that it will be necessary to provide proof of purchase for any in- guarantee service calls.

25

Image 25

Contents Instruction Book Your New Appliance Table of contents Safety information Control panel Description of the productCeramic glass surface Residual heat indicatorCooking zones Chec controlBefore use Connection of child safety device on zonesProtection of the glass ceramic surface Regulating Operating instructionsDouble cooking zone Residual-Heat indicator Autostop AutomaxRecommended settings when using Automax Child safety device Page Advice and hints for using the cooking zones Page Cleaning and maintenance Ceramic glass hob Stainless steel surfacesDo not stare at the heating units when in operation Clearance InstallationFixing Cut-out measurementsUnits externally measured length Electrical connection Single-phase zero-earthUnpacking Technical dataSomething not working Sympton SolutionProblems 08705 929 Service & spare partsGuarantee conditions France Page Page Page 325 88-1710 Rev