Frigidaire FGEF3041KF manual Dual radiant surface elements some models

Page 9

Dual radiant surface elements (some models)

Symbols on the backguard will help choose which portion of the dual radiant element to set. The symbol indicates a setting for the inner coil only. The symbol indicates a setting for both inner and outer coils.

To operate a dual radiant element:

SETTING SURFACE CONTROLS

1.Place correctly sized cookware on dual radiant surface element.

2.Push in and turn the surface control knob clockwise (See Fig. 2) to begin heating both the inner and outer portions of the dual element. If only the inner heating portion is needed for smaller cookware, push in and turn the knob counter-clockwise (See Fig. 1).

3.When cooking is complete, turn the dual radiant surface element OFF before removing the cookware.

Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The surface control knobs do not have to be set exactly on a particular mark.

Use the marks as a guide and adjust the control knob as needed. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

You may switch from either single or dual element setting at any time during cooking. See Suggested radiant surface element settings table on previous page.

Heating with inner (small)

element only

Fig. 1

Heating with both

elements

Fig. 2

CAUTION

•Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

•Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.

IMPORTANT

Donotallowaluminumfoil,orANYmaterialthatcan melttomakecontactwiththeceramicglasscooktop. If these items melt on the cooktop they will damage the ceramic cooktop.

NOTES

•The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

•The Element ON indicator lights will glow when one or more elements are turned ON. A quick glance at these indicator lights when finished cooking is an easy check to be sure all control knobs are turned OFF. The Hot Surface indicator light will continue to glow AFTER the control knob is turned to the “OFF” position and will remain on until the heating surface area has cooled sufficiently.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use&Care Product Record and Registration ContentsTip Over Hazard DefinitionsImportant Instructions for Using Your Oven When flaming foods under a ventilating hood, turn the fan on Important Safety NoticeBefore Setting Surface Controls Using proper cookwareCookware material types About the ceramic glass cooktop Element on & hot surface indicator lightsAbout the radiant surface elements Types of cooktop elementsSuggested radiant surface element settings Setting Surface ControlsSingle radiant surface elements all models To operate the single radiant elementTo operate a dual radiant element Dual radiant surface elements some modelsMed Home Canning Oven vent location Before Setting Oven ControlsRemoving, replacing & arranging racks Types of oven racksOven Control Functions Read the Instructions Carefully Before Using the OvenSetting the clock Setting Oven ControlsChanging temperature display F or C Setting a silent control panelSetting the minute timer Setting oven lockoutTo set the oven lockout feature To change the timer while it is in useTo change the oven temperature after bake has started Setting bakeTo set bake For best baking resultsWhen the set bake time runs out Setting timed bake and delayed timed bake featuresHow speed bake works Benefits of speed bake convection cookingTo set speed bake RoastingSetting broil Suggested broil settings tableTo set Broil Adjusting the oven temperature To adjust oven temperatureOperating the oven light SELF-CLEANING Self-CleaningRead before starting self-clean Stopping or interrupting a self-clean cycle Setting a self-clean cycleWhen the self-clean cycle has completed Cleaning recommendation table Care & CleaningCooktop maintenance Cooktop cleaningTo maintain the cooktop appearance do not Aluminum foil and oven liners Cooktop cleaning cont’dAluminum foil and oven liners cont’d Replacing interior oven lightRemoving and replacing the lift-off oven door To remove oven doorTo replace oven door Problem Solution Setting Oven Controls sectionControls section Before YOU Call Solutions to common problems Cleaningsection Page Page Disclaimer of Implied Warranties Limitation of Remedies Major Appliance Warranty
Top Page Image Contents