Frigidaire 316000641 To Start the Self-Clean Cycle, To Set the Controls for a Self-Clean Cycle

Page 15

Oven Cleaning

(continued)

Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

To Set the Controls for a Self-Clean Cycle:

1.Be sure the clock shows the correct time of day.

2.Push CLEAN. "— — —" appears in the display.

3.Push the UP ARROW until "3:00" appears in the display for a 3 hour cycle, or push the DOWN ARROW until "2:00" appears in the display for a 2 hour cycle.

4.As soon as the UP or DOWN ARROW is released, "CLn" appears in the display.

5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.The "LOCK" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day will appear in the display window and the "LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Product Registration ContentsImportant Safety Instructions Electric ignition models only Grounding InstructionsFor a silent control panel Temperature conversionControl Pad Functions Oven can be programmed toSetting the Clock and Minute Timer To Set the Minute TimerTo Set the Clock Flame Size Type of Cooking Proper Burner AdjustmentsFlame Size Surface BurnersTo operate the surface burner ControlsDownward Position Before Setting Warmer Drawer ControlsIf equipped Arranging Warmer Drawer Rack Positions Upright PositionTo Operate the Warmer Drawer Setting Warmer Drawer ControlsIndicator Light Temperature SelectionSetting Oven Controls Before Setting Oven ControlsTo Set the Automatic Timer Timed Bake Feature When the Set Bake Time Runs OutOnce the Controls are Set To Broil Rack Position From Top FoodPush Vari Broil Adhere to the following cleaning precautions Oven CleaningSelf-Cleaning Oven Stopping or Interrupting a Self-Cleaning CycleTo Start the Self-Clean Cycle To Set the Controls for a Self-Clean CycleWhen the Self-Clean Cycle is Completed Cleaning Various Parts of Your Range General CleaningTo Clean the Burner Base and Gas Opening To Clean the CooktopTo Clean the Contoured Well Areas To Remove the Burner Cap AssemblyTo Remove and Replace Warmer Drawer some models To Remove and Replace Oven DoorTo Change the Oven Light some models To Clean the Spice Rack some modelsChanging Cooktop and/ or Oven Lights To Change the Cooktop Light some modelsTo Adjust Oven Temperature Adjusting Oven TemperatureOccurrence Possible CAUSE/SOLUTION Avoid Service ChecklistOven does not operate Page Range Warranty OL0037.PM5 AS0030.PM5
Top Page Image Contents