Frigidaire 316000641 Control Pad Functions, Oven can be programmed to, For a silent control panel

Control Pad

Functions

CANCEL PAD— Used to cancel any function previously entered except the time of day and minute timer. Push CANCEL to stop cooking.

BAKE PAD—Used to enter the normal baking mode temperature.

VARI BROIL

PAD— Used to select the variable broil function.

CLEAN PAD— Used to select the self- cleaning cycle.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

	UP and DOWN ARROW PADS— Used along with the		CLOCK PAD— Used
			to set the time of
	function pads to select oven temperature, cooking
			day.
	time, stop time (when programming an automatic
				FEATURE
	stop time), time of day, clean time and minute timer.
				INDICATOR
				LIGHTS— These
				light to show
				which feature is in
				use.
				BAKE TIME PAD—
				Used to enter the
				length of the
				baking time.
				STOP TIME PAD—
OVEN, PRE-HEAT & LOCK LIGHTS—
		TIMER ON/OFF		Used to set the desired
The "OVEN" light will glow each time		PAD— Used to set		stop time for baking.
the oven burner turns on to maintain		or cancel the		Can be used with
the set oven temperature. The "PRE-		minute timer. The		BAKE TIME to
HEAT" light will glow when the oven is		minute timer does		program a delayed
first set to operate, or if the desired		not start or stop		bake cycle.
temperature is reset higher than the		cooking.

actual oven temperature. The "LOCK" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks.

The oven can be programmed to:

•Bake normally

•Time bake

•Vari Broil

•Self-clean

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOP TIME. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard.

Note: The control will return to the audible mode after a power outage.

Temperature conversion:

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Push VARI BROIL. "— — —" appears in the display.

2.Push and hold the UP ARROW until "HI" appears in the display.

3.Push and hold VARI BROIL until °F or °C appears in the display.

4.Push the UP or DOWN ARROW to change °F to °C or °C to °F.

5.Push any function pad to return to normal operating mode.

5